AWESOME!!!

[hradec]

Ok, I wasn't expecting much when I first installed, but after running it... WOOOOOOWWWW!!!!

Dude... its working PERFECTLY!!!

I was able to create a RAIDZ pool, and it started working right away!!!

Its brilliant!!

Only problem I had was when creating the pool. It failed in webmin with this error:

use '-f' to override the following errors: /dev/disk/by-id/ata-ST3000DM001-1CH166_Z1F1MHP4 does not contain an EFI label but it may contain partition information in the MBR. /dev/disk/by-id/ata-ST3000DM001-1CH166_Z1F1P29W does not contain an EFI label but it may contain partition information in the MBR. /dev/disk/by-id/ata-ST3000DM001-1CH166_Z1F1P2EN does not contain an EFI label but it may contain partition information in the MBR. /dev/disk/by-id/ata-ST4000DX001-1CE168_Z304TCP8 does not contain an EFI label but it may contain partition information in the MBR.

When I clicked returned, all my config for the pool was gone. But no big deal... started over, checked FORCE, but got the same error!!

Turns out the FORCE checkbox didn't change the command line at all.

But because you made it spit out the command line when a error occurs, it was just a matter of copy/paste the command line to a shell, add the -f option and voila!!! It created successfully!!

After that, I returned to webmin and the pool is there!!!

TOP NOTCH JOB MAN!!!

I'll keep testing it thoroughly since I'm deploying a new server which will basically be a ZFS NAS running ARCH linux!!

I'll keep you up to speed!!

thank you so much for making this module, and keep up the good work!! let me known if you need any help with anything!!

-H