wrong snap point

[GithubMingEnter]

Hello, I found a problem. As shown in the figure when I use multiple lanes to reduce lanes, the connection snap point of the rear lanes is incorrect , and the connection is not continuous.

[johschmitz]

Well, I am sorry for the inconvenience but with the current implementation you will have to configure a matching road cross section yourself manually. The smartness you want is theoretically possible but will require many more man hours to be implement. What I can think of is a way to let the user add custom road sections of his own to more or less comfortably work around this issue. At least that part is definitely something on my closer road map. I guess I will have to add a little button and then the currently configured cross section will be added to the drop down list.

[johschmitz]

@GithubMingEnter Just for your understanding: If you haven't so far, please study about the OpenDRIVE reference line and lane linkage in the official standard document available on the ASAM website to better understand this issue and how to fix it with the configuration of the lanes.

[GithubMingEnter]

Thanks for your reply. The OpenDRIVE file is passed the test normally, but the fbx file shows like this figure, I maybe try to fix it

[johschmitz]

Hm, sounds a bit strange, you could save it and upload the .blend file (in a .zip file) here if you want me to have a closer look.

[GithubMingEnter]

hi , It is my zip file test.zip e

[johschmitz]

@GithubMingEnter I have made a lot of changes, please reopen or open a new issue if you are still having this issue with the latest version.