John Boiles

Good find! On Tue, Feb 20, 2024 at 11:23 AM Francis ***@***.***> wrote: > Someone got it somewhat working > https://github.com/ludoux/esp32-nut-server-usbhid > > — > Reply to this email directly,...

There [have been reports](https://3dprinterwiki.info/wanhao-i3-plus-documentation-factory-files/) of it helping to downgrade to wanhao's official 2.11 firmware before flashing new LCD firmware. Maybe worth a shot if the card partitioning doesn't help.

This is what I've found: https://community.home-assistant.io/t/keymaster-z-wave-lock-manager-and-scheduler/166419/2238 > I too have several dings in my doorframe where the deadbolt locked while I was slamming the door shut. See the [Door open...

> Also the rfseriallookup will capture movement even when the system is armed. So normally when the system is not armed the system doesn't capture motion events? So motion detectors...

Oh heh i'm not the first one to notice.

Oh amazing sorry I missed that! Don't think that was there when I first set up Improv last fall or maybe I missed it. Thank you!

@jesserockz on closer inspection those docs are just for Improv over serial. Has there been any thinking on implementing this over BLE? Will be a little trickier because of the...

We're thinking about sending APs in the same way as Improv over serial, but just using a BLE serial library that reassembles the packets in a serial stream. Let me...

We built a C++ host implementation. Let me look back at the protocol to see if it makes sense for us to contribute to the improv spec

Just updated to the 64bit version after several years running fine on the 32 bit version. I'm on a Pi3 w/ 1GB ram. Runs fine initially, then dies within 12-24hrs...