ebusd telling signal connected while ebusd can't connect to ebus network interface

[eazy]

Description

From time to time my ebus network interface crashes and ebusd can't connect to it.

But the MQTT Message of ebusd tells signal = true

After Powercycling the interface everything works fine again. So I need to detect that problem, to auto powercyle the intreface.

Actual behavior

Can't detect ebusd is realy working because of the wrong signal information.

Expected behavior

signal should be false maybe there should be an additional connection state regarding the ebus interface and not just the ebus signal itself.

ebusd version

23.2

ebusd arguments

--mqttvar=filter-direction=r|u|^w

Operating system

other

CPU architecture

x64

Dockerized

None

Hardware interface

adapter 3.0 Ethernet

Related integration

MQTT Home Assistant via mqtt-hassio.cfg

Logs

2023-07-26 21:02:35.828 [bus error] unable to open 192.168.222.107:9999: ERR: generic I/O error 2023-07-26 21:02:35.828 [bus notice] device invalid

[john30]

which firmware version is it?

[eazy]

device status: extra info: firmware 1.1[8419].2[847f], jumpers 0x37

[john30]

can you ping the ip in this case? what is the status of the LEDs on the adapter and the W5500?

[eazy]

the device is responding to icmp. Adapter LED States: yellow: on blue: on green: normal flickering red: off

WS550 LED States: red: on

And I changed the USB-Powersupply already, same behavior.

[john30]

please check with the updated source as in e3abbf1

[john30]

closed due to inactivity

[MartinMichaux]

Hey, I am actually also having this issue. My ebus adapter is connected to the vr94f network module. I receive signals like:

Try to telnet to the adapter

telnet 192.168.1.100 9999 Trying 192.168.1.100... Connected to 192.168.1.100. Escape character is '^]'. ƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƵƴ 1ƶƽƪƪƪƪƪƪƪƪƪƪƪƪƪƪƵƉ ?7ƀǿǿǿƪƪƪƪƪvƵ Aǿ=ǹǿaǿƪƪƪƪƪvƵǼ ǿǿƪƪƪƪƵ GǿǿǿǢƚƪƪƪƪƪvƵ ǿǿǿƅƚƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪvƵƶǿǓƪƪƪƪƪƪƪƪƪƵƴ 2ƶ3ƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪDZƵ$ƪƪƪDZƵ$ǚƕƪƵƴ 2ƶ3ƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƵƴ 3ƷǔƪƪƪƪƪƵƉ ?6ƀǿǿǿƩƪƪƪƪƪvƵ Aǿǹǿaǿ?ƪvƵƶǿǓƪƪƪƪvƵǼ ǿơƪƪƪƪƵ GǿǿǿǢƚƪƪƪƪƪvƵ ǿǿǿƅƚƪƪƪƪƪƪƪƪƪƵ|2Ơ|ǀǏǀ{<ưƪƪƪƪƪƪƪƪƵ}3:}ǀƋǰƪƪƪƪƪƪƪƵ~4 ~Ǐ ǀ!9ƪƪƪƪƪƪƪƵ5ƑƐƑƪƪƪƪƪƪƪƪƵƀ6ǩƀnjƪƪƪƪƪƪƪƪƪƵƴ 3Ʒǔƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪ

and there doesnt seem to be data parser for it. Could you help ?

Thanks in advance.

[john30]

Hey, I am actually also having this issue. My ebus adapter is connected to the vr94f network module. I receive signals like:

Try to telnet to the adapter

telnet 192.168.1.100 9999 Trying 192.168.1.100... Connected to 192.168.1.100. Escape character is '^]'. ƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƵƴ 1ƶ_ƽƪƪƪƪƪƪƪƪƪƪƪƪƪƪƵƉ ?7ƀǿǿǿƪƪƪƪƪvƵ Aǿ=ǹǿaǿƪƪƪƪƪvƵǼ ǿǿƪƪƪƪƵ GǿǿǿǢƚƪƪƪƪƪvƵ ǿǿǿƅƚƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪvƵƶǿǓƪƪƪƪƪƪƪƪƪƵƴ 2ƶ_3ƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪDZƵ$ƪƪƪDZƵ$ǚƕƪƵƴ 2ƶ_3ƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƵƴ 3Ʒ_ǔƪƪƪƪƪƵƉ ?6ƀǿǿǿƩƪƪƪƪƪvƵ Aǿ_ǹǿaǿ?ƪvƵƶǿǓƪƪƪƪvƵǼ ǿơƪƪƪƪƵ GǿǿǿǢƚƪƪƪƪƪvƵ ǿǿǿƅƚƪƪƪƪƪƪƪƪƪƵ|2Ơ|ǀǏǀ{<ưƪƪƪƪƪƪƪƪƵ}3:}ǀƋǰƪƪƪƪƪƪƪƵ~4 ~Ǐ ǀ!9ƪƪƪƪƪƪƪƵ5ƑƐƑƪƪƪƪƪƪƪƪƵƀ6ǩƀnjƪƪƪƪƪƪƪƪƪƵƴ 3Ʒ_ǔƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪƪ

and there doesnt seem to be data parser for it. Could you help ?

misplaced here on this already closed issue, but anyway: look at this image here: https://adapter.ebusd.eu/v5-c6/index.en.html#connections as of today, you need to have ebusd running somewhere in the network for interpreting the traffic