ebusd
ebusd copied to clipboard
john30
PID file location
I've realized that when I reboot my system, I got several errors like:
systemd[1]: /lib/systemd/system/ebusd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/ebusd.pid → /run/ebusd.pid; please update the unit file accordingly.
before ebusd starts.
If I restart the system manually, it doesn't happen.
I've tried adding --pidfile=/run/ebusd.pid into the ebus.conf file, but the problem is the same, so it looks like the raspbian is starting the service "initially" ignoring the config file?
Think I have the same problem.
Pid file is created and deleted in ebusd main see: /src/ebusd/main.cpp 659 // create pid file and try to lock it 660 pidFile = fopen(opt.pidFile, "w+"); 661 662 umask(S_IWGRP | S_IRWXO); // set permissions of newly created files to 750
If you are logged in as "user" you don’t have permissions to read and write the pid file and this creates the issue. The permission (in line 662) 750 has to be changed to 755 or 777.
This is happening even if I'm not "logged-in", I mean if I do a "sudo reboot" and not log in immediately. So I'm not sure it is related to the user permissions.
To test if it is a permission issue you could try following.
Stop the ebus service By closing the service the PID file is deleted.
Manual create your /run/ebusd.pid file with 777 permission. Think it must contain a string like 0\0 Than reboot.
If the file exist ebusd will write the PID number in it. If you don’t get the error during start-up and the service starts, it is a permission issue.
I can't reproduce this on a RPi buster with 21.3. maybe this is related to the umask? you might want to check this.
To test if it is a permission issue you could try following.
Stop the ebus service By closing the service the PID file is deleted.
Manual create your /run/ebusd.pid file with 777 permission. Think it must contain a string like 0\0 Than reboot.
If the file exist ebusd will write the PID number in it. If you don’t get the error during start-up and the service starts, it is a permission issue.
Same problem even if I've created the pid file in both directories (/run and /var/run). Only because I've monit service to restart the services it comes up after a few seconds. The interesting thing is that the PID in both dirs has the same value. I'm not sure to understand why, if I'm using --pidfile=/run/ebusd.pid
/run and /var/run are usually symlinked to each other. do you start ebusd as user root?
Yes, I was thinking they are symlinked, but I was surprised by the error message "references path below legacy directory /var/run/, updating /var/run/ebusd.pid → /run/ebusd.pid", may be the error message is outdated.
When the rpi is rebooted, it starts with the service, I believe that means user root ... when it is restarted by monit, it start as root.
eBus
check process eBus matching "ebusd" start program = "/bin/systemctl start ebusd.service" stop program = "/bin/systemctl stop ebusd.service" if cpu > 1% for 5 cycles then restart if totalmem > 5 MB for 5 cycles then restart
ps -ef | grep ebusd root 2010 1 0 11:26 ? 00:00:01 /usr/bin/ebusd --scanconfig --httpport=8889 --log=all error -d enh:10.10.10.23:9999
Would it not be easier to change the permissions in main.cpp to avoid issues with clean PI installs?
660 pidFile = fopen(opt.pidFile, "w+"); 661 662 umask(S_IWGRP | S_IRWXO); // set permissions of newly created files to 750 Could the last line not be changed in 777?
Just created the ebusd.pid file in the /var/run/ folder with sudo nano ebusd.pid
Changed permissions like in main.ccp sudo chmod 750 ebusd.pid Ebusd doesn’t start
sudo chmod 755 ebusd.pid Ebusd doesn’t start
sudo chmod 777 ebusd.pid Ebusd does start!
So PI like I’m logged in now has only “other” permissions.
Ok
Managed to login as root, but under root the desktop taskbar is missing!!! With ctrl+alt+T i could open the terminal and ebusd runs fine.
Think I have to build ebusd myself and change permission in line 662 to 777 so I can run ebusd as “PI” user. To have none taskbar on the desktop is not real practical!
The missing taskbar under root seems to be intended and not easy to fix. Or where can I download an image of the OS without this feature?
Ron
guys, I really don't know what you're doing here.
you need to make sure that the system starts ebusd as user root or at least with a user having enough privileges. there is no need to have a root UI or anything like that.
ebusd is a daemon and as such it is not supposed to be started in daemon mode as a non-privileged user. maybe you didn't do the installation correctly. check the output of ls -la /usr/bin/ebusd and post the content of the start script.
Hi John,
Problem is that default Pi OS if you are logged in as “root” doesn’t have a taskbar on the desktop. And this is not real practical, you must do everything from the terminal. if the permissions of the ebusd.pid file was 777 instead of 750 you could login as PI user with working desktop and ebusd would work.
For a final standalone application ebusd works fine, but if you have to do a lot of debugging on ebus messages it is not real practical.
Other thing I noticed is if you install by deb file the file ebusd.log in folder /var/log/ is not created, had to manual create this file to get ebusd working.
Ron
I always ssh as user "pi", not root, but ebusd is installed by default, so I guess it runs as root?
pi@iot:~ $ ls -la /usr/bin/ebusd -rwxr-xr-x 1 root root 339056 Nov 10 07:05 /usr/bin/ebusd
default start script:
pi@iot:~ $ cat /etc/init.d/ebusd #!/bin/bash
BEGIN INIT INFO
Provides: ebusd
Required-Start: $network $remote_fs $syslog
Required-Stop: $network $remote_fs $syslog
Default-Start: 2 3 4 5
Default-Stop: 0 1 6
Short-Description: controls ebusd, the daemon for communication with eBUS heating systems.
END INIT INFO
DAEMON=/usr/bin/ebusd PIDFILE_PREFIX=/var/run/ebusd PIDFILE_SUFFIX=.pid
if test -f /lib/lsb/init-functions; then . /lib/lsb/init-functions else . /etc/init.d/functions
log_daemon_msg() { logger "$@"; }
log_end_msg() { [ $1 -eq 0 ] && RES=OK; logger ${RES:=FAIL}; }
log_failure_msg() { logger "FAIL $@"; }
log_warning_msg() { logger "WARN $@"; }
status_of_proc () { status $3; }
fi
[ -r /etc/default/ebusd ] && . /etc/default/ebusd
if [ ! -x $DAEMON ]; then log_failure_msg "$DAEMON is not available or not executable." exit 5 fi
ALL_OPTS=${!EBUSD_OPTS*} if [ ${#ALL_OPTS[@]} -lt 1 ]; then ALL_OPTS[0]=EBUSD_OPTS fi instance="EBUSD_OPTS$2" instance=${!instance}
start_instance () { local opts suffix opts=$1 shift suffix="${opts#EBUSD_OPTS}" log_daemon_msg "Starting ebusd${suffix}" ebusd pidfile=$PIDFILE_PREFIX${suffix}$PIDFILE_SUFFIX start-stop-daemon --start --quiet --oknodo --pidfile $pidfile --exec $DAEMON -- --pidfile $pidfile ${!opts} log_end_msg $? }
stop_instance () { local opts suffix opts=$1 shift suffix="${opts#EBUSD_OPTS}" log_daemon_msg "Stopping ebusd${suffix}" ebusd pidfile=$PIDFILE_PREFIX${suffix}$PIDFILE_SUFFIX start-stop-daemon --stop --quiet --oknodo --pidfile $pidfile log_end_msg $? rm -f $PIDFILE_PREFIX${suffix}$PIDFILE_SUFFIX }
case $1 in start) if [ -z "$2" ]; then for opts in $ALL_OPTS; do start_instance $opts done elif [ -z "$instance" ]; then log_failure_msg "ebusd$2 is not configured" else start_instance EBUSD_OPTS$2 fi ;; stop) if [ -z "$2" ]; then for opts in $ALL_OPTS; do stop_instance $opts done else if [ -z "$instance" ]; then log_warning_msg "ebusd$2 is not configured" fi stop_instance EBUSD_OPTS$2 fi ;; restart|force-reload) ARGS=($@) $0 stop ${ARGS[@]:1} && sleep 2 && $0 start ${ARGS[@]:1} ;; status) if [ -z "$2" ]; then for opts in $ALL_OPTS; do suffix=${opts#EBUSD_OPTS} pidfile=$PIDFILE_PREFIX$suffix$PIDFILE_SUFFIX status_of_proc -p $pidfile $DAEMON ebusd$suffix done else if [ -z "$instance" ]; then log_warning_msg "ebusd$2 is not configured" fi pidfile=$PIDFILE_PREFIX$2$PIDFILE_SUFFIX status_of_proc -p $pidfile $DAEMON ebusd$2 fi ;; *) echo "Usage: $0 {start|stop|restart|force-reload|status} [instance]" exit 2 ;; esac
hi changing the file /etc/systemd/system/ebusd.service manually
from PIDFile=/var/run/ebusd.pid
to PIDFile=/run/ebusd.pid
eliminates the warning in messages
https://github.com/john30/ebusd/pull/502 created
I’m totally unknown with Linux but you already noticed that.
Do change the permissions in the terminal with "sudo su" Then I can start ebusd manual, and it works fine.
In the past I stopped ebusd with “service ebusd stop” and manual started it again to reload the csv files after modification. This seems not to work anymore, have to reboot to load the new csv files.
Looked in “/etc/systemd/system/” but I don’t see the file "ebisd.service" does this causes this behaviour?
Where can I find the ebusd.service file?
Did installed ebusd by deb file!
@rhellenbrand to be honest i do not see any connection between your problem and the original one.
can you please open a new ticket and try to summarize, what is not working for you? Have you tried to reinstall the ebusd package? Can you include the output into the new ticket? tnx