john30
Ebus Adapter WebUi And MQTT Hangs with 2024-04-20
I updated my adapter to 2024-04-20 (from 2024-03-30) and it became quite unstable with that version. WebUI breaks. I.e. the /status endpoint no longer works and I cannot reboot anymore via the webui. MQTT still published and ebus also still works.
Any idea on how to solve that?
I let it run over night (since I did not want to go down just yesterday). MQTT actually stopped working. Ebus continued. WebUI did not recover.
Rebooted it today and it started working again. I disabled MQTT for now to see if that helps.
Just after I closed the issue it occurred again. WebUI crashed again. Guess I will disable MQTT again for now.
might be related to mqtt messages sent to the device. so if it occurs again, please check which messages were sent to the topic prefix. anyway, there was a little issue with extracting the topic suffix, so you might want to try with the new release
Today it crashed with MQTT disabled. I did restart ebusd a few times which might have contributed. I took the opportunity to upgrade to 2024-05-18.
Any idea what else I should do to stabilize it? I already added a remote controlled plug adapter to automate restarts but that is more a stop gap solution for now.
so did it with the former version or the current one? you could check the power supply and/or the USB cable as these are often an issue. if that does not improve the situation, i would need you to be more concrete and also supply logging along with the browser being used, as well as how it is connected (tunneling/proxy or direct), other participants potentially accessing the ui etc