john30
esp d1 mini stop working when plugged in to ebus adapter v3
hi , I flashed ebus-v3_d1mini.bin on esp8266 -12f , and setup wifi with no issue. But when I plug the esp into the adapter , esp does not connect to wifi .
Power cord and supply are good . If I plug power into the adapter's usb nothing happen . If I plug power into esp's usb , adapter's blue led start blinking ,green and orange are on, esp apparently not working .
any suggestion? thnak's fab
mostly power source related, so try another one first. and check if latest firmware is better as the WIFI signal strength was increased
already changed 3 . changed also esp ( twice) ... no luck . I'm trying to use a spare RPI . Eventually , could you sell a complete working system ( ebus+esp module )? thanks f
Il giorno sab 17 set 2022 alle ore 09:03 John @.***> ha scritto:
mostly power source related, so try another one first. and check if latest firmware is better as the WIFI signal strength was increased
— Reply to this email directly, view it on GitHub https://github.com/john30/ebusd-esp/issues/69#issuecomment-1250016481, or unsubscribe https://github.com/notifications/unsubscribe-auth/AQPCMXHJ2UOELW6VKVW4H5DV6VUNZANCNFSM52AAHX6Q . You are receiving this because you authored the thread.Message ID: @.***>
did you do some fancy port setup on the esp through the command line interface or the web?
it works fine, I'm using a wifi variant myself, so the problem is elsewhere.
If I plug power into the adapter's usb nothing happen .
then you probably didn't do the jumpers correctly.