ebusd-configuration icon indicating copy to clipboard operation
ebusd-configuration copied to clipboard

Published 20 hours ago • verified publisher icon john30

VWL 75/5, VWL 78/5, VRC 720, VR 921, config not recognized

Open Nyrobee opened this issue 2 years ago • 4 comments

Trying to start ebusd on ebus adapter from Daniel Kucera. Adapter seems to connect but the bus messages give an indication of incomplete or unknown config files. I've tried the PR "support ctlv2" from janphkre but without result. After a while my system asks for maintenance. See attached log files for details. If somebody can point me in the right direction I would appreciate it. Ebusd_Vaillant 75_5.txt

Nyrobee avatar Jan 28 '23 18:01 Nyrobee

Can you show your /etc/default/Ebusd file?

Geg0r avatar Feb 02 '23 22:02 Geg0r

Thanks for reply. The problem with system going in maintenance mode is solved by powering the ebusd adapter (it was relying on power from the ebus but in my case that wasn't enough clearly).

After fixing a typo I got my values for the VRC 720 and some values for HMU.

Nyrobee avatar Feb 04 '23 14:02 Nyrobee

@Nyrobee I have the same issue - so you are saying the unknown messages that can be seen in your attached log went away by supplying external power to the adapter???

Also what was the typo? Can you please elaborate?

SzosszeNET avatar Feb 23 '23 23:02 SzosszeNET

No, I can read the VR 720 with the pull request for CTLV2. The HMU I still can read only partially, VWZ and NEXT2 don't have CSV files on GitHub so unknown. I made a mistake by putting config repository in wrong directory. The external power was needed because my bus went in maintenance mode after connecting the ebus adapter.

Nyrobee avatar Feb 26 '23 16:02 Nyrobee