atomTEC plus VCW AT 174/4-5-H & VRT 392

[Trainerr]

Hello,

i got following log file:

2019-05-12 17:21:43.624 [main notice] ebusd 3.3.v3.3-19-ga3f4999 started with auto scan 2019-05-12 17:21:44.276 [bus notice] bus started with own address 01/06 2019-05-12 17:21:44.301 [bus notice] signal acquired 2019-05-12 17:21:44.737 [bus notice] new master 10, master count 2 2019-05-12 17:21:44.804 [bus notice] new master 03, master count 3 2019-05-12 17:21:44.804 [update notice] received unknown MS cmd: 1008b5110101 / 0932340080ffff0000ff 2019-05-12 17:21:46.826 [update notice] received unknown MS cmd: 1008b5040100 / 0a00505309ffffffff0080 2019-05-12 17:21:47.052 [update notice] received unknown BC cmd: 10feb505020400 2019-05-12 17:21:48.885 [update notice] received unknown MS cmd: 1008b5100900000078ffff05ff00 / 0101 2019-05-12 17:21:54.365 [main error] scan config 08: ERR: wrong symbol received 2019-05-12 17:21:54.984 [update notice] received unknown MS cmd: 1008b5110101 / 0932340080ffff0000ff 2019-05-12 17:21:56.458 [main error] scan config 15: ERR: wrong symbol received 2019-05-12 17:21:59.035 [update notice] received unknown MS cmd: 1008b5100900000078ffff05ff00 / 0101 2019-05-12 17:22:03.125 [update notice] received unknown MS cmd: 1008b5110101 / 0932340080ffff0000ff 2019-05-12 17:22:05.152 [update notice] received unknown BC cmd: 10feb516080039331712050719 2019-05-12 17:22:05.411 [update notice] received unknown MS cmd: 1008b512020000 / 00 2019-05-12 17:22:08.561 [main error] scan config 08: ERR: wrong symbol received 2019-05-12 17:22:09.268 [update notice] received unknown MS cmd: 1008b5100900000078ffff05ff00 / 0101 2019-05-12 17:22:10.659 [main error] scan config 15: ERR: wrong symbol received

Is my gas boiler not supported?

[john30]

there are many "ERR: wrong symbol received" which seems to be related to hardware issues. which adapter are you using?