John
John
i think this might be different depending on which device is being used. need to check that with my EHP. Please post your "ebusctl info" output
might be related to #38
indeed. so the question remains, which one is correct?
depends, if [quick.inc](https://github.com/john30/ebusd-configuration/blob/master/ebusd-2.1.x/de/vaillant/quick.inc) is loaded by one of the configs, then this should be possible with `ebusctl w -c XX load on` (after replacing XX with your HWC circuit name)
right. you might want to give it a try by adding the quick.inc to the 700.csv as it is done on others
on some machines, the load has to be initiated on the mixing circuit ("mc"). you might want to check on which circuits the "load" is defined by issuing "ebusctl find...
there is no config file for manufacturer 0x20 (RAWE) afaik, so you'd have to do create your own as described [here](https://github.com/john30/ebusd/wiki/HowTos#creating-new-message-definition-files)
well, sending everything to the broadcast address is a valid way of sending the data. the master 0x37 will probably also allow active retrieval of data but without a controller...
you might want to have a look at these as well: https://github.com/john30/ebusd-configuration/pull/28 https://github.com/john30/ebusd-configuration/issues/27
any hints to scan issues in the ebusd log file?