versatile-thermostat-ui-card
versatile-thermostat-ui-card copied to clipboard
A custom card for a Versatile thermostat in home assistant based on versatile_thermostat integration
After installing the card through hacs, it doesn't appear when I try to add it to lovelace panel. Even if I try to manually configure, I receive the error: 'Custom...
I'm getting this error when trying to add the repo in HACS 1.34.0 with HA 2024.2.4 : ![image](https://github.com/jmcollin78/versatile-thermostat-ui-card/assets/1379524/767f914f-eaa2-41ce-8606-f6c84bc0a516)
See here: https://github.com/jmcollin78/versatile_thermostat/issues/354#issuecomment-1961050097
When used on a "masonry" type dahboard, the tile does not move properly when other elements are present ### good flow - elements occupy available width ### bad flow -...
In my case using the presets messes up my climate-entity _(my semi-educated guess is that the Adax device only supports Off and Heat)_ It would be nice if I could...
I have multiple instances of Versatile Thermostats, and I use a Versatile-thermostat-ui-card on all of them. I have noticed a small diplay bug : on the only "thermostat-over-thermostat" I have,...
In a room with no fixed heating, I am using a smart socket and plug-in electric heater. The heater has physical selections for 750W, 1250W or 2000W, and a built-in...
It seems that the title and temperature bar are aligned differently to the temperature text and buttons that appear within the arc of the temperature bar. As a result hiding...
Hi Nice solution to save a change in the preset values by change the set temp and double clicking on a preset to save. The problem is that the new...