H100i V2 only shows Pump RPM. No Fans RPM, Fan Control or Pump control

[thul]

Im using the @SuspiciousActivity fork, everything loads. But FanControl only shows me the Pump RPM. I'm missing the Fan FPM and both controls for some reason.

Running liquidctl.exe status shows me the pump and fan rpm just fine. I can also set the fan/pump speed fine using .\liquidctl.exe -m h100i set fan speed 100.

Am i missing something? or has this just not been implemented yet?

Device #2: Corsair Hydro H100i v2
├── Vendor ID: 0x1b1c
├── Product ID: 0x0c09
├── Release number: 0x0100
├── Serial number: 7289_2.0
├── Bus: usb3
├── Address: 7
├── Port: 19.2
└── Driver: Hydro690Lc