Jason John Schwarz
Jason John Schwarz
I do not believe so, because I already referenced that article to get it setup. It is actually is working (see my follow up post) initially, but then failovers between...
Testing this on v0.4.4 again and I am able to bring up the nodes with IPv4 and IPv6 dual stack per the information above. I did generate a new set...
I am seeing that error constantly in the logs after the elections...it seems that having both an IPv4 and IPv6 copy running at once is the cause. > On Jul...
OK, it seems to be functioning for dual stack and they are ending up on the same host, but it does seem to fight a lot. Anything I can do...
Actually, I take back the "seems to be functioning". After a period of time running both the entire cluster became unstable. Once I turned off the IPv6 secondary setup it...
Is the method I used above still the best way to handle the dual stack setup or does v0.5.0 have another method to setup the dual stack control plane VIP?
So would moving the IPv4 and IPv6 pods into separate namespaces help that at all? > On Aug 17, 2022, at 11:26 AM, Daniel Finneran ***@***.***> wrote: > > >...
When you have a chance to review let me know if I should try that. > On Aug 17, 2022, at 11:39 AM, Daniel Finneran ***@***.***> wrote: > > >...
This seems to still be an issue in the new 0.2.5 release. CuteSDR connects fine, but CubicSDR just gives a "not found" why I connect via IP to the NetSDR....
Any updates that might have affected this situation?