pywws Take data from Home Assistan sensor

I have my wh1080 station connected to home server with rtl_433. Station data is published by HA on mqtt. Would it be possible to fetch weather data from mqqt instead of USB? Thank you

Mar 20 '23 05:03 giuian69

(Not sure why this question is attached to an eight year old pull request...)

It would not be possible to fetch data from mqtt without making major changes to pywws. I don't use mqtt and have no interest in making such changes.

Mar 20 '23 07:03 jim-easterbrook

All right. I took the liberty of asking since I used pywws for so many years until the base of the station broke. For this now I take the data with a 433mhz receiver and display them with Home Assistant. Home Assistant also sends data to mqtt. Anyway, thanks for the reply (apologies for making a mistake in opening the request). Compliments for work.

Mar 21 '23 05:03 giuian69

You might be able to use bits of pywws if you write your own software. But pywws is such a mess (I've learnt a lot more about Python since I started writing it) that I wouldn't use it as the basis for anything.

Mar 21 '23 07:03 jim-easterbrook