jgonzis

Nice comments

> Under 1.33 I am getting 84.5MH/s on my Gigabyte Eagle 3080Ti with a +1300Mhz memory overclock, under 1.34 that dropped to 74MH/s with the same overclock. > > I...

> Linux nvidia driver 470.74 Could you try to put FAN at 100% and restart the miner... just to discard any Memory Thermal... only to recheck... in 1.34 but if...

> Ok the calibration with the fans at 100% completed much faster with far fewer locks. and it has settled in at the same as the 1.33 at 80% fan....

> 我的一块体质不好的3080ti在1.3.3下可以超频到1190，算力81。但在1.3.4下只能到1050，不然频繁触发锁，算力76。其他正常的在1.3.3下能到86，1.3.4只能到82 是的，看起来，GDDR6x 1.34的效果不是最好的。下一个版本应该可以解决这个问题。我们还发现，在1.34版本中，风扇的速度有时应该达到1.33版本的最大速度。对不起，我用了一个翻译器

> Hi, I have the same issue on my 3080 ti. 87 mh on 1.33 but 82 on 1.34 I stay on 1.33 and wait the 1.35 Thanks for the...

> I use lolminer for my RTX 3060 unlocked with 470.05 driver in 1x slot. it gives 40 mh with 1.32 but with 1.34 it gives 35. and also is...

Could you try new 1.48 please?

> Feature Request: aarch64/armv8 build. > any chance of it happening? For which algo? Actually all algo are GPU orientated...

> Hi! Many thanks to the developers! Well done as always! Only one question - in the version up to 1.47 the ETH / TON ratio was 35/750, respectively, now...