Add headphone jack

[redfox67]

If I were to add a headphone jack were would I solder it to? I am thinking about using this one.

[jfm92]

Hi! Well, I'm not sure if the jack that you're thinking to use fits inside the enclosure, but if you think that it's possible or you can find something a little bit smaller, you need to do the next:

• Solder directly to the driver it's very difficult due to the pads are very small, so I suggest to first unsolder the speaker.
• Once you have unsoldered the speaker, these are the sound output pads:

I think that the easiest way, is to add a pair of wires and place the jack on the bottom part of the enclosure because the front has very little space available and might be a real challenge to fit a jack there. Also, I think that can help you a little see the 3D model of the enclosure to visualize the internal space. https://github.com/jfm92/microByte_case/tree/2df587d479643be42f094e5c9a5782840cb68b26/Enclosure

I hope this message can help you and I'm anxious to see your experiment!