Jacek Fedoryński

Also if the dial is Surface Dial-compatible then it likely uses `0x00010037` code.

I forgot to mention it here, but GPIO outputs are now supported!

The codes will probably be the same over USB, but it's strange that the light doesn't blink when you operate the dial. It should blink every time it receives something,...

You can try this test build, it should have the monitor tab working in the Bluetooth versions (click on artifacts at the bottom): https://github.com/jfedor2/hid-remapper/actions/runs/5882479664 Though I suspect that the dial...

Not sure if I understand the question. The hex codes at the bottom are only for inputs that are not listed above. If a code is known (has a name...

This can probably be fixed. The macro would still only trigger once (no auto-repeat), I assume that's what you expect.

I know it's been some time, but in the latest release "hold" macro mappings should now work correctly!

Thanks for providing some real world examples, it does sometimes feel like I'm developing this in a vacuum and miss some obvious things. Regarding the difference in behavior you're observing...

Hard to say, I don't have one to test. There's no guarantee it will work with the dual Pico version, but it might. Does the LED on the Pico blink...

The Stadia controller works.