rootOnNVMe
rootOnNVMe copied to clipboard
jetsonhacks
Switch the rootfs to a NVMe SSD on the Jetson Xavier NX and Jetson AGX Xavier
Great piece of code; I just tried that out on a Xavier AGX 32Gb with - microSD boot card (flashed with current jetpack), not touching the built-in storage - PCIe...
General USB mouse and keyboard(both not wireless). I could boot from SD and the mouse/keyboard were functioning normally. After rootOnNVMe, the mouse and keyboard are not functioning at boot screen....
**Describe the issue** Please describe the issue After copying over rootfs to SSD and then enabling booting from SSD, I reboot. It works fine as long as I'm simply warm...
Hello, First, thank you to jetsonhacks for making these scripts available for everyone to use. I ran into a little issue when running these scripts on my device and wanted...
**Describe the issue** Hi, I want to use USB device on ACM device. But when I plug-in USB, it didn't show up the ttyACM0 in /dev. I tested on SD...
**Describe the issue** Drivers for IMX477 camera are not showing up when root on SSD **What version of L4T/JetPack** L4T/JetPack version: 32.4.4 **Which Jetson** Jetson: Xavier NX **To Reproduce** Steps...
The current documentation states: > Once this service is installed, the rootfs will be on the SSD. If you upgrade to a newer version of L4T using OTA updates (using...
**Describe the issue** When I used this: rootOnNVMe then when I move the system from emmc to NVMe my USB was influenced... When I plug my GNSS receivers they could...
Thanks for greate repo. I flashed JP4.6 on EMMC, after that I switched roofs from EMMC to NVME. Now I have a new NVME with installed JP5.1. Can put the...
**Describe the issue** Please describe the issue **What version of L4T/JetPack** L4T/JetPack version: 4.6.3 **Which Jetson** Jetson: TX2 **To Reproduce** Steps to reproduce the behavior: When I run this `/usr/src/tensorrt/bin/trtexec...
Metadata
Owner
Metadata
Switch the rootfs to a NVMe SSD on the Jetson Xavier NX and Jetson AGX Xavier