Quantizer / would really like panel to reflect current scale selected by CV

[vogelscheiss]

As you know your quantizer module displays the scale that is selected by the scale-selection knob.

However it does not display the current scale when it is selected by CV inputs instead. The same is true for the current root note when selected by CV.

This makes the module very difficult to use with CVs, unless you really don't care about the result or can easily tell the difference between scattered notes quantized in an Aeolian vs. a Phrygian scale, say.

I'd be grateful if you could update the module to display scales and root notes whether selected by knobs or CVs.

[nay-seven]

+1 ;-)

[jeremywen]

ok, i will have to work on that at some point

[veryfungi]

I also would like to ask for this. :)

[veryfungi]

A workaround, could you provide the voltages required for the different notes?

[veryfungi]

I guess with a little setup I can determine at what voltage each octave and scale switches at. Thanks

[veryfungi]

No. Voltage Key

---

1 0.833v = C 2 1.666v = C# 3 2.500v = D 4 3.333v = D# 5 4.166v = E 6 5.000v = F 7 5.833v = F# 8 6.666v = G 9 7.500v = G# 10 8.333v = A 11 9.166v = A# 12 10.00v = B

[magicthise]

Did anyone do the work to establish the scale voltages as well?