sandify
sandify copied to clipboard
jeffeb3
web based user interface to create patterns that could be useful for robots that draw in sand with ball bearings.
Hello, I have noticed that when I make a drawing that 'exceeds' the dimensions of the drawing space in Sandify although it shows that the lines draw to the edge...
I appreciate that this is mainly for sand machines, but I wonder how useful this would be with a few improvements for pen plotting. Just adding lifting/dropping gcode (between patterns...
When I enter this starting GCode it always gets reformatted, in a way that the machine will not run properly. I have to manually edit all my files before running...
Currently when exporting multiple layers, Sandify just continues appending gcode to the end of the file. I suggest adding a delimiter comment at the start/end of each layer something like:...
It would be useful to have a new layer type called code that would provide a textbox that arbitrary code could be entered similar to the start/end code in the...
I have a couple of requests and a potential issue. Let me start with the issue. I have built a CoreXY [Sand-Table](https://github.com/rdudhagra/Sand-Table) based on the design by [rdudhagra](https://github.com/rdudhagra), and the...
I know this one is rare, but the text, would be cool if you can mirror it, along with a few more fonts. My machine is not setup right, and...
The preview pane of the patterns is very nice when generating patterns. If exporting the gcode would also save a copy of the preview pane as a .png or .jpg...
After trying to format some text on my table using multiple layers I've noticed that there's no indication within the pattern files of where one layer ends and the next...
https://forum.v1engineering.com/t/sandtrails-a-polar-sand-table/16844/112?u=jeffeb3 We shouldn't allow that. The thr output probably needs to add an extra guard to keep rho > 1 from happening.