jctk

Results 37 comments of jctk

Hi @mimosa4 Please let me know a few things to help me isolate the issue. Q1. Was Focuser working on Raspberry PI 4 before you applied this patch? Q2. Did...

When you test with RPi4, could you check with the original code without the patch and with the patched code?

I am using INDI with bookworm 64bit for both RPi4 and RPi5. Now, if I set the INDI Control Panel settings on the Astroberry Focuser on the RPi5 to the...

> When I start a movement, the engine brake comes into action and the axis does not rotate. If the motor is rattling but not moving in a certain direction,...

I am concerned that the voltage and current of the A4988 motor is too high relative to 17HS08-1004S, but I don't think that is the cause. I think logs are...

I looked at the log. The function AstroberryFocuser::Connect() determines the model as Raspberry Pi 5, the correct device "/dev/gpiochip4" is opened, and the function outputs a log indicating that it...

Thanks for merging this patch. It is only a workaround because there is no guarantee that this logic will work in the future since it depends on the RPi model...