solaredge
solaredge copied to clipboard
jbuehl
SolarEdge inverter logging data capture
I recently had a SE10000H-US installed and noticed when I visit the IP address of the inverter it has a status page with some high level information (although no specifics...
@jbuehl hopefully a basic question! If I connect an RS485 to the inverter set as slave and use semonitor.py to collect data via a rpi, can I still have my...
Hi, I'm having an issue getting semonitor.py to run. I'm running semonitor.py on Arch Linux with the latest updates: Linux stripe 5.18.7-1-danctnix #1 SMP PREEMPT_DYNAMIC Mon Jul 11 04:43:57 UTC...
In july 2016 SolarEdge published a document https://www.solaredge.com/sites/default/files/sunspec-implementation-technical-note.pdf on sunspec protocol. According this document you can read modbus over LAN/TCP using the port 502. In this mode, the inverter will...
Not an issue but a question. From what I have read in my documentation my inverter does not have a RS232 interface. Any chance that I can get the encryption...
Hey there, my setup is SE-WND-3Y400-MB (Energy Meter) | SE3000H (Inverter with Display, ZigBee, Ethernet, 2x RS485 (2nd is unconnected), no SetApp, no RS232 that i can find on the...
This week both of my inverters were replaced (turns out the old ones couldn't handle a brief
Dear all, I'd like to share my repository https://github.com/dragoshenron/solaredge-webscrape It includes a single bash script to webscrape the data from the solaredge portal. It retrieves power optimizer data as available...
Hi, I succesfully used the TCP listing option for years with old version se5k. Now I have a new one without display and I’m reading a lot of things that...
I am trying to see if I can set my storedge/solaredge battery charge/discharge profiles through semonitor. This can be done manually by taking the front cover off of the inverter...
