mpp-solar
mpp-solar copied to clipboard
jblance
Implement Voltronic (Infini and compatible) Hybrid 10K inverter
Hello, could you please implement Voltronic Hybrid 10K Inverter?
All information about this could be found here: https://github.com/riogrande75/infinipoll10k
Thank you and regards,
Chris
Hi John,
yes, 10K speaks P17. Here ist the output from the get commands, I did not test all set commands for now. There appear some „unknown“ answers and ET is rejected which may happen because its zero in the device, but there is no error in SolarPower wich correctly shows "0".
Have a look at infinipoll10k: INGS, RTCP, EMINFO could be implemented for P17 and ^P014EDyyyymmddnnn
root@solar:~# mpp-solar -p /dev/hidraw0 -P PI17 -c PI
Command: PI - Device Protocol Version inquiry
------------------------------------------------------------
Parameter Value Unit
protocol_version 17
root@solar:~# mpp-solar -p /dev/hidraw0 -P PI17 -c ID
Command: ID - Device Serial Number inquiry
------------------------------------------------------------
Parameter Value Unit
serial_number 1496162107100016000000
root@solar:~# mpp-solar -p /dev/hidraw0 -P PI17 -c VFW
Command: VFW - Device CPU version inquiry
------------------------------------------------------------
Parameter Value Unit
cpu_version VERFW:00001.01
root@solar:~# mpp-solar -p /dev/hidraw0 -P PI17 -c VFW2
Command: VFW2 - Device CPU 2 version inquiry
------------------------------------------------------------
Parameter Value Unit
cpu_2_version VERFW2:00001.01
root@solar:~# mpp-solar -p /dev/hidraw0 -P PI17 -c MD
Command: MD - Device Model inquiry
------------------------------------------------------------
Parameter Value Unit
machine_number Infini-Solar 10KW/3P
output_rated_va 10000 kW
output_power_factor 99 pf
ac_input_phase_number 3 number
ac_output_phase_number 3 number
norminal_ac_output_voltage 2300 0.1V
norminal_ac_input_voltage 2300 0.1V
battery_piece_number 04 ea
battery_standard_voltage_per_unit 120 0.1V
root@solar:~# mpp-solar -p /dev/hidraw0 -P PI17 -c PIRI
Command: PIRI - Device rated information
------------------------------------------------------------
Parameter Value Unit
ac_input_rated_voltage 2300 0.1V
ac_input_rated_frequency 500 Hz
ac_input_rated_current 0434 0.1A
ac_output_rated_voltage 2300 0.1V
ac_output_rated_current 0434 0.1A
mppt_rated_current_per_string 0187 0.1A
battery_rated_voltage 0480 0.1V
mppt_track_number 2 ea
machine_type Hybrid type
topology transformerless
parallel_for_output enabled
unknown_value_in_response_11 0
root@solar:~# mpp-solar -p /dev/hidraw0 -P PI17 -c GS
Command: GS - Device rated information
------------------------------------------------------------
Parameter Value Unit
solar_input_voltage_1 0 0.1V
solar_input_voltage_2 0 0.1V
solar_input_current_1 0 0.1A
solar_input_current_2 0 0.1A
battery_voltage 0 0.1V
battery_capacity 0 %
battery_current 0 0.1A
ac_input_voltage_r 2318 0.1V
ac_input_voltage_s 2298 0.1V
ac_input_voltage_t 2309 0.1V
ac_input_frequency 4983 0.01Hz
ac_input_current_r 0 0.1A
ac_input_current_s 0 0.1A
ac_input_current_t 0 0.1A
ac_output_voltage_r 0 0.1V
ac_output_voltage_s 0 0.1V
ac_output_voltage_t 0 0.1V
ac_output_frequency 0 0.01Hz
ac_output_current_r 0.1A
ac_output_current_s 0.1A
ac_output_current_t 0.1A
inner_temperature 24 °C
component_max_temperature 24 °C
external_battery_temperature 0 °C
setting_change_bit Settings changed - please refresh
root@solar:~# mpp-solar -p /dev/hidraw0 -P PI17 -c PS
Command: PS - Device Power Status
------------------------------------------------------------
Parameter Value Unit
solar_input_power_1 0 W
solar_input_power_2 0 W
battery_power W
ac_input_active_power_r 0 W
ac_input_active_power_s 0 W
ac_input_active_power_t 0 W
ac_input_total_active_power 0 W
ac_output_active_power_r 0 W
ac_output_active_power_s 0 W
ac_output_active_power_t 0 W
ac_output_total_active_power 0 W
ac_output_apparent_power_r 0 VA
ac_output_apparent_power_s 0 VA
ac_output_apparent_power_t 0 VA
ac_output_total_apparent_power 0 VA
ac_output_power_percentage 0 %
ac_output_connect_status Disconnected
solar_input_1_work_status Idle
solar_input_2_work_status Idle
battery_power_direction Idle
dc/ac_power_direction Idle
line_power_direction Idle
root@solar:~# mpp-solar -p /dev/hidraw0 -P PI17 -c MOD
Command: MOD - Device working mode inquiry
------------------------------------------------------------
Parameter Value Unit
working_mode Fault mode
root@solar:~# mpp-solar -p /dev/hidraw0 -P PI17 -c WS
Command: WS - Warning status inquiry
------------------------------------------------------------
Parameter Value Unit
solar_input_1_loss 1 bool
unknown_value_in_response_1 1
unknown_value_in_response_2 0
unknown_value_in_response_3 0
unknown_value_in_response_4 0
unknown_value_in_response_5 0
unknown_value_in_response_6 1
unknown_value_in_response_7 0
unknown_value_in_response_8 1
unknown_value_in_response_9 0
unknown_value_in_response_10 0
unknown_value_in_response_11 0
unknown_value_in_response_12 0
unknown_value_in_response_13 0
unknown_value_in_response_14 0
unknown_value_in_response_15 0
unknown_value_in_response_16 0
unknown_value_in_response_17 0
unknown_value_in_response_18 0
unknown_value_in_response_19 0
unknown_value_in_response_20 0
unknown_value_in_response_21 0
unknown_value_in_response_22
root@solar:~# mpp-solar -p /dev/hidraw0 -P PI17 -c FLAG
Command: FLAG - Query enable/disable flag status
------------------------------------------------------------
Parameter Value Unit
mute_buzzer_beep Enabled
mute_buzzer_beep_in_standby_mode Disabled
mute_buzzer_beep_only_on_battery_discharged_status Disabled
generator_as_ac_input Disabled
wide_ac_input_range Disabled
n/g_relay_function Disabled
unknown_value_in_response_6 0
unknown_value_in_response_7 0
unknown_value_in_response_8 1
root@solar:~# mpp-solar -p /dev/hidraw0 -P PI17 -c T
Command: T - Query current time
------------------------------------------------------------
Parameter Value Unit
datetime 20220214220325 YYYYMMDDHHMMSS
root@solar:~# mpp-solar -p /dev/hidraw0 -P PI17 -c ET
Command: ET - Query total generated energy
------------------------------------------------------------
Parameter Value Unit
warning0 Command ET was rejected
root@solar:~# mpp-solar -p /dev/hidraw0 -P PI17 -c BATS
Command: BATS - Query battery setting
------------------------------------------------------------
Parameter Value Unit
battery_maximum_charge_current 600 0.1A
battery_constant_charge_voltage(c.v.) 560 0.1V
battery_floating_charge_voltage 540 0.1V
battery_stop_charger_current_level_in_floating_charging 0 0.1A
keep_charged_time_of_battery_catch_stopped_charging_current_level 60 Minutes
battery_voltage_of_recover_to_charge_when_battery_stop_charger_in_floating_charging 530 0.1V
battery_under_voltage 420 0.1V
battery_under_voltage_release 480 0.1V
battery_weak_voltage_in_hybrid_mode 480 0.1V
battery_weak_voltage_release_in_hybrid_mode 540 0.1V
battery_type Li-Fe
reserved
battery_install_date YYYYMMDDHHMMSS
ac_charger_keep_battery_voltage_function_enable/diable Disabled
ac_charger_keep_battery_voltage 480 0.1V
battery_temperature_sensor_compensation 0 0.m1V
max._ac_charging_current 600 0.1A
battery_discharge_max_current_in_hybrid_mode 300 A
Greets Christoph
ok will look at creating a copy of the pi17 protocol and try to implement fixes for the above issues ET might be more problematic, let me think about that one
@cbr303 I have added those new commands INGS, RTCP, EMINFO in my fork here https://github.com/skoky/mpp-solar/tree/p17_new_commands and it seems to work on my InfiniSolar 10k as well. Anyway those are not documented anywhere in specs. Will improve results parsing and make pull request to @jblance for merging
I have implemented those undocumented commands INGS, RTCP, EMINFO Not sure how to name response params, suggest change if you wish.
Commands to query energy seems to work on mine
pi@raspi4:~/mpp-solar $ sudo mpp-solar -p /dev/hidraw0 -P PI17 -c ET
Command: ET - Query total generated energy
------------------------------------------------------------
Parameter Value Unit
generated_energy 11131 kWh
or
pi@raspi4:~/mpp-solar $ sudo mpp-solar -p /dev/hidraw0 -P PI17 -c ED20211111
Command: ED20211111 - Query generated energy of day
------------------------------------------------------------
Parameter Value Unit
generated_energy 885 Wh
When using ET commands, do not use nnn, it is calculated in the code