JKBMS JK232 to work with JIABAIDA BMS

[VictorBucha]

Hi, below the results of polling Jiabaida's AP20S004 BMS with JK 232 protocol at 9600 baud:

root@raspberrypi:/home/pi# jkbms -p /dev/ttyUSB2 -P JK232 -b 9600 -c getBalancerData
Command: getBalancerData - Get Balancer Data
------------------------------------------------------------
Parameter                       Value           Unit
start_byte                      dd
command_code                    03
status                          00
data_length                     29
total_battery_voltage           50.13           V
total_current                   0.0             A
remaining_capacity              161.07          Ah
nominal_capacity                162.0           Ah
cycles                          3               cycles
production_date                 2acb
equilibrium_state_(todo)        0028
equilibrium_state_2_(todo)      0000
protection_state_(todo)         0000
keep                            23
remaining_battery               99              %
fet_control_status              03
number_of_battery_strings       15
number_of_ntc                   3

All the fugures retrieved are correct! I think it may greatly improve the use of your package! Jiabaida communication protocol new (1).pdf