Amiga-2000-EATX
Amiga-2000-EATX copied to clipboard
jasonsbeer
An Amiga 2000 PCB in the EATX form factor.
 Correct the language counter
ISSUE: Add internal header for CD Audio, such as found on the Amiga 4000. SEVERITY: Enhancement request. SCOPE: Future revision. PROPOSED FIX: Review A4000 schematics and include similar solution.
ISSUE: Through holes for the slots are somewhat small. This makes them slightly difficult to install. SEVERITY: Enhancement request. SCOPE: Future revision. Slot footprints only. PROPOSED FIX: Review actual pin...
Hi everyone, I've made a calculation for production on PCBWay and seems like it is possible to make a small batch for a price of ~300 USD(all populated will be...
ISSUE: The XCLKEN pin is lacking a pullup resistor, which could result in the 74HC258 switching to the XCLK signal when there is not one present. SEVERITY: There have been...
ISSUE: A A314 expansion can not be used on the B2000 EATX board. SEVERITY: Enhancement request. SCOPE: Future revision. PROPOSED: Add the option for a pin-header similar to the A500...
Hello Jason, The termination from C675 on pin 96 must be on pin 95. The orginal schematic from A2000_R6 has no termination on pin 96 but C678 on pin 95....
Hi I'm in the middle of the build and I've just gotten to the point where I've put voltage on the mainboard for the first time to take some measurements...
Hi! Finally I finished assembling the a2000 and it started up almost immediately! :) But as it turned out, the reset practically doesn’t work... every third or tenth time, or...
