Unable to boot on rk3566 Board base on Guaid From Getting started with Home Assistant Operating System development | Home... 4 Prepare development environment and the images were created in output/images (couldn’t find a /release directory) after sudo scripts/enter.sh make green

[cronggui]

Hi! I installed the image that is haos_green-13.0.dev0.img I placed the image on an sd card and tested multiple sd cards, and every time with the same result.

Follow the guaidline: https://developers.home-assistant.io/docs/operating-system/getting-started/

The log of the boot is the following one:

ddrconfig:0 LP4 MR14:0x4d LPDDR4, 324MHz BW=32 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=2048MB tdqss: cs0 dqs0: 385ps, dqs1: 265ps, dqs2: 313ps, dqs3: 217ps,

change to: 324MHz PHY drv:clk:38,ca:38,DQ:30,odt:0 vrefinner:41%, vrefout:41% dram drv:40,odt:0 clk skew:0x58

change to: 528MHz PHY drv:clk:38,ca:38,DQ:30,odt:60 vrefinner:16%, vrefout:41% dram drv:40,odt:0 clk skew:0x79

change to: 780MHz PHY drv:clk:38,ca:38,DQ:30,odt:60 vrefinner:16%, vrefout:41% dram drv:40,odt:0 clk skew:0x5f

change to: 1056MHz(final freq) PHY drv:clk:38,ca:38,DQ:30,odt:60 vrefinner:16%, vrefout:29% dram drv:40,odt:80 vref_ca:00000068 clk skew:0x42 cs 0: the read training result: DQS0:0x44, DQS1:0x44, DQS2:0x46, DQS3:0x3e, min : 0xf 0xf 0x11 0x10 0x2 0x5 0x9 0x5 , 0x9 0x9 0x6 0x1 0xd 0xb 0xf 0x9 , 0x13 0x10 0xf 0xc 0x5 0x1 0x3 0x6 , 0xd 0x7 0x6 0x1 0xe 0x10 0xb 0xf , mid :0x30 0x30 0x32 0x30 0x23 0x26 0x2a 0x26 ,0x2b 0x2b 0x27 0x23 0x2f 0x2d 0x30 0x2b , 0x33 0x31 0x2f 0x2c 0x26 0x22 0x23 0x27 ,0x2d 0x28 0x26 0x22 0x2e 0x30 0x2b 0x2f , max :0x51 0x52 0x53 0x51 0x45 0x48 0x4b 0x48 ,0x4e 0x4e 0x49 0x46 0x51 0x4f 0x51 0x4e , 0x54 0x52 0x4f 0x4c 0x47 0x43 0x44 0x48 ,0x4e 0x4a 0x46 0x44 0x4f 0x50 0x4c 0x4f , range:0x42 0x43 0x42 0x41 0x43 0x43 0x42 0x43 ,0x45 0x45 0x43 0x45 0x44 0x44 0x42 0x45 , 0x41 0x42 0x40 0x40 0x42 0x42 0x41 0x42 ,0x41 0x43 0x40 0x43 0x41 0x40 0x41 0x40 , the write training result: DQS0:0x76, DQS1:0x65, DQS2:0x6c, DQS3:0x5f, min :0x94 0x97 0x98 0x96 0x8b 0x8e 0x8e 0x90 0x90 ,0x7d 0x7e 0x7a 0x79 0x83 0x83 0x85 0x85 0x7f , 0x8b 0x8b 0x88 0x87 0x7f 0x7c 0x7f 0x85 0x86 ,0x83 0x7f 0x7e 0x7b 0x86 0x87 0x84 0x88 0x7f , mid :0xb1 0xb4 0xb5 0xb3 0xa8 0xa9 0xab 0xab 0xab ,0x99 0x99 0x95 0x95 0x9e 0x9c 0x9d 0x9d 0x99 , 0xa8 0xa7 0xa2 0xa4 0x9b 0x95 0x98 0x9d 0xa0 ,0x9e 0x9a 0x99 0x97 0xa0 0xa3 0x9c 0xa2 0x98 , max :0xce 0xd1 0xd3 0xd0 0xc5 0xc5 0xc8 0xc7 0xc7 ,0xb5 0xb5 0xb0 0xb1 0xb9 0xb5 0xb6 0xb5 0xb3 , 0xc5 0xc4 0xbc 0xc1 0xb7 0xae 0xb1 0xb6 0xba ,0xba 0xb5 0xb5 0xb3 0xbb 0xc0 0xb4 0xbc 0xb2 , range:0x3a 0x3a 0x3b 0x3a 0x3a 0x37 0x3a 0x37 0x37 ,0x38 0x37 0x36 0x38 0x36 0x32 0x31 0x30 0x34 , 0x3a 0x39 0x34 0x3a 0x38 0x32 0x32 0x31 0x34 ,0x37 0x36 0x37 0x38 0x35 0x39 0x30 0x34 0x33 , CA Training result: cs:0 min :0x46 0x40 0x3c 0x33 0x3d 0x35 0x3e ,0x45 0x3e 0x3b 0x34 0x3a 0x32 0x3d , cs:0 mid :0x82 0x82 0x79 0x75 0x78 0x75 0x6c ,0x80 0x7f 0x77 0x75 0x76 0x74 0x6b , cs:0 max :0xbe 0xc4 0xb6 0xb8 0xb3 0xb6 0x9a ,0xbb 0xc1 0xb3 0xb7 0xb2 0xb7 0x99 , cs:0 range:0x78 0x84 0x7a 0x85 0x76 0x81 0x5c ,0x76 0x83 0x78 0x83 0x78 0x85 0x5c , out U-Boot SPL board init U-Boot SPL 2017.09 (Dec 09 2021 - 15:11:15) rk3568_sdmmc_set_clk,rate=400000 unrecognized JEDEC id bytes: ff, ff, ff Trying to boot from MMC2 rk3568_sdmmc_set_clk,rate=400000 rk3568_sdmmc_set_clk,rate=400000 rk3568_sdmmc_set_clk,rate=400000 rk3568_sdmmc_set_clk,rate=52000000 No misc partition space exhausted alloc_read_gpt_entries: ERROR: Can't allocate lX bytes for GPT Entries GPT: Failed to allocate memory for PTE part_get_info_efi: *** ERROR: Invalid GPT *** part_get_info_efi: *** ERROR: Invalid Backup GPT *** spl: partition error

Verified-boot: 0

Checking atf-1 0x00040000 ... sha256(0d5225a4ab...) + OK

Checking u-boot 0x00a00000 ... sha256(0be13226e8...) + OK

Checking fdt-1 0x00aaab28 ... sha256(c03172500e...) + OK

Checking atf-2 0x00069000 ... sha256(6ede7a3b44...) + OK

Checking atf-3 0x0006b000 ... sha256(fde0ef262b...) + OK

space exhausted

does everyone can give my a debug or resolve this question? thank you!!