Jamin Collins

[FR] get layer count from mainsail

1

### Is your feature request related to a problem? Please describe The docs indicate that I need to modify my slicer to inject gcode that sets variables for the number...

build failure -- multiple undefined references: memcpy, strrchr, strlen, etc

9

I have tried building on both Arch Linux and Ubuntu 20.04. On both systems I have also tried both of the following toolchains: * gcc-arm-none-eabi-9-2019-q4-major-x86_64-linux.tar.bz2 * gcc-arm-none-eabi-9-2020-q2-update-x86_64-linux.tar.bz2 In all cases,...

Multiple plates

4

# Description Fixes issue with attempting to create a large number of plates for a sizable bed (~400mm). Corrects an enum update error # Screenshots/Recordings/Graphs Without changes: 17x 400mm plates...

FR: allow all speeds to be set as percentage of single centralized (base) value

2

**Is your feature request related to a problem? Please describe.** When trying to increase the speed a printer prints at, there are numerous settings that one must adjust within Orca...

overhang speed settings ignored

10

### Is there an existing issue for this problem? - [X] I have searched the existing issues ### OrcaSlicer Version 2.0.0-rc ### Operating System (OS) Linux ### OS Version Arch...

Dark Mode Issues Tracking Ticket

4

### Is there an existing issue for this problem? - [X] I have searched the existing issues ### OrcaSlicer Version 2.0.0 ### Operating System (OS) Linux, macOS, Windows I'm creating...

Repeated `CAP: Device select() timeout`

12

I have an Arducam 5MP Camera and can't seem to get it streaming reliably under ustreamer. Device details: ``` $ v4l2-ctl --list-devices Arducam 5MP Camera Module: Ardu (usb-0000:c2:00.3-1.2): /dev/video0 /dev/video1...

RPI4, raspbian: installs node for wrong architecture (64-bit vs 32-bit)

1

``` $ cat /etc/os-release PRETTY_NAME="Raspbian GNU/Linux 11 (bullseye)" NAME="Raspbian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=raspbian ID_LIKE=debian HOME_URL="http://www.raspbian.org/" SUPPORT_URL="http://www.raspbian.org/RaspbianForums" BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs" ``` The installed node binary appears to be built for ARM...