james-fry

homeassistant/# topics are used for MQTT discovery in ARM The autodiscovery payload JSON gives the state topic for sensor readings: ``` { "unit_of_measurement":"W", "device_class":"power", "icon":"mdi:gauge", "value_template":"{{ value_json.power0 }}", "state_topic":"rtl4332mqtt/CurrentCost_TX_3575",

Hi Ian. Very pleased it's working for you. You ask a very good question, and and raised what is a clear use case for this add-on. Unfortunately it's not a...

Thanks for the detailed response. Hope this helps @ianfiske I'd be happy to roll it into the add-on (or at least add to the readme)

You are right! I'll try to get an update out soon...

Another suggestion is to use the online image referenced in the original CSV DB, rather than require the local image. e.g. for this plant, with 200x200 resolution: http://pkb.resource.huahuacaocao.com/bW9uc3RlcmEgZGVsaWNpb3NhLmpwZw==?imageView2/1/w/200/h/200

@iantrich Absolutely you can :) Just thinking of ways this card will "just work" nicely with with existing customized plants without having to move the images around, and also to...

This is a really interesting idea. I found this thread since I recently purchased a [TI cc1352p](http://www.ti.com/lit/ds/symlink/cc1352p.pdf) based board for zigbee2mqtt but I am really interested by the sub-1GHz (inc...

Sure. I bought this board: http://www.ti.com/tool/LAUNCHXL-CC1352P It’s about $50 + tax There are two versions of the board with different RF tuning for either 2.4ghz or sub 1ghz. I purchased...

The zigbee2mqtt project is beginning to move away from the cc2530. The cc2530 is a low power (CPU) device and has limitations as a zigbee coordinator.

The CC1352P-2 is I think especially interesting for omg as it can also do sub 1ghz as well a 2.4ghz (zigbee)