Chunhui Ouyang
Chunhui Ouyang
那就重构
好吧
Had the same problem in kubuntu
If possible, I also expect esphome to support IPv6 protocol stack, and I think this is the trend in the future
@runborg > on the other hand i cant find any definition of remote-nodes(hosts?), is this missing or have i just missed it? One of the connect options is used to...
> About the `MODE` and `DeviceType` variables. > There seems to be a correlation between these two options, following this from the documentation: > > ``` > DeviceType = (platform...
Normally, the following command is used to generate the host configuration file ``` set interfaces tinc tinc0 subnet 192.168.10.0/24 set interfaces tinc tinc0 local_address my_service_address set interfaces tinc tinc0 port...
@runborg If there are no other problems, I will consider doing the final test in GNS3
@runborg ``` vyos@fc00:1::1's password: scp: /config/tinc0/hosts/r1: Permission denied ``` I don’t know why, using scp will always report denial of permission, and there is no information even when calling in...
I tried to obtain it automatically, but it is not easy in the special environment of cli. The exchange process still needs to be done manually. The host configuration of...