Ivor Wanders

> Why is no information appearing on the serial monitor? I don't know, I haven't used the Arduino application in years, I'm sure there could be many reasons. > Buddy,...

After writing this post I thought I'd at least check 24.04 to see if both icons are in use there, and they are, the panel uses the `-panel` variety, and...

> I wouldn't be against putting them back, although it would be nice to have the 'colourful' ones exclusive to the dialog, and the panel/OSD having the 'mono' ones, but...

Single pulse makes sense, there's one pulse [at the start of initKWP](https://github.com/iwanders/OBD9141/blob/fc824827359c98ef6559d58080b51f23072f8834/src/OBD9141.cpp#L469-L481), but after that you should see the bytes listed there on line 481. If you don't see that,...

> does it have to be UART TX and RX pins specifically? Depends on your hardware, practically all hardware has only a few pins that can be used as a...

I have not tested it with that chip, I developed it against the `MFRC630` as the readme says, but if I remember correctly, the `CLRC663` has the same registers? So...