ivport

ivport copied to clipboard

Rev 3 Multiplexer kills RasPI3

4

When I connect the ribbon cable to the Rasperry Pi 3 it shuts off. Just having the multiplexer connected to the GPIO headers doesnt cause it to fail. Only when...

jtice01

When I connect my ivport to raspberry pi, the pi shuts down. I have tried different ribbon cables that work with my camera modules and it still causes the pi...

jasdeepdhillon13

I need to know before I buy this product. Please someone help me. Can four cameras (1,2,3,4) take pictures sequentially in a precisely sychronized way? such that , for example,...

kimjongyoung

Simultaneous still image capture scenario

1

Hi Can you please tell if it's feasible for this multiplexer to take simultaneously still images from 2 or 4 camera?

anuj2rock

2+ Boards Code

4

Hi guys, One board works fine but could someone put up the code to get two more boards working (8+ cameras) for the rapid picture taking code (ivport_capture_sequence_A.)

dj12th

How much time does it take to switch between cameras? All the processing on images are performed rapidly (approximately less than 5ms) and there is no need to save the...

farzanehnakhaee70

Can we control the multiplexer in java with pi4j?

mesutpiskin

mmal: Received unexpected camera control callback event, 0x4f525245

5

I purchased ivPort in order to connect two cameras onto one RaspberryPi2 board. However, We did not successfully connect them so far. Here is a problem we have. We connected...

TTerui

Hello, I am using a Raspberry PI 3 Model B with raspbian stretch (last update) I am using the IVport-v2 dual module to switch between two raspberry pi cameras (Pi...

clsnordic

C++ kontrol

1

Hı there, Can we control the multiplexer with c++?

burak8758