ivport-v2

ivport-v2 copied to clipboard

I currently have an ivport v2 dual module connected to my rapsberry pi 3 model B v1.2, to which I connect a single camera (pi camera rev 1.3, ov5647 sensor)...

paol-gornek

Supported= 1 Detected= 0

5

I am getting this no matter which slot I try it in. We can read it but it won’t activate.

CitizenDan

Camera not detected on restart (except reboot)

1

I followed the guide to setting up ivport-v2 on my RPi and running `sudo python2 test_ivport.py` fine, if I also run `sudo reboot` it still works. When I run `vcgencmd...

ghostiek

Image from camera 2 is stripped

6

I have a problem with an IVPort V2 quad multiplexer. Image from camera 2 is always stripped. I have changed the ribbon cable and the result is still the same....

eboudrand

compatible with Raspberry Pi 4?

3

is it possible to run the board (and software) with raspberry pi? greetings

freegroup

Hello everyone :) I am using an IVPORT-V2 multiplexer for my masters' thesis. The multiplexer is connected to Raspberry Pi, Model B VI.2. Raspberry runs on Ubuntu Mate 18.04., with...

IvonaKr

Unable to run test script

1

Hallo, I bought one of your board to use in a project I followed your installation instructions but when I run the scripts I got this error: ``` pi@raspberrypi:~/ivport-v2 $...

weirdgyn

board issue

1

I can get the board working since it looks like that and giving: $ vcgencmd get_camera supported=1 detected=0 I have tried the listed issue's solution but not get it work..!!...

HarisFateh

Hi Is this shield compatible with the Nvidia Jetson Nano to build a stereo camera system? Can switching between the cameras be automated (e.g., after each frame)? Thnx

StefanUlbrich

hello i recently bought the ivport V2 dual and everything works up untill the part where i try to run the code to test the cameras. the module is detected...

mikaleoa