test code not working

[mikaleoa]

hello i recently bought the ivport V2 dual and everything works up untill the part where i try to run the code to test the cameras. the module is detected supported 1 detected 1 and everything but when i try to run the code import ivport

raspistill capture

def capture(camera): "This system command for raspistill capture" cmd = "raspistill -t 10 -o still_CAM%d.jpg" % camera os.system(cmd)

iv = ivport.IVPort(ivport.TYPE_DUAL2) iv.camera_change(1) capture(1) iv.camera_change(2) capture(2) iv.close() it says no module named ivport im using a raspberry pi model 3 B+ with two cameras that are V2.1 witht the device gpio pins inserted farthest away form the usb ports first i try thepreview camera and one shows but again the code is not working any ideas why also im usiong python shell 3.5.3 also python test_ivport.py mmal: mmal_vc_component_enable: failed to enable component: ENOSPC Traceback (most recent call last): File "test_ivport.py", line 60, in main() File "test_ivport.py", line 56, in main picam_capture() File "test_ivport.py", line 31, in picam_capture iv.camera_open() File "/home/pi/ivport-v2/ivport.py", line 135, in camera_open self.picam = picamera.PiCamera(camera_v2=camera_v2, resolution=resolution, framerate=framerate) File "/home/pi/ivport-v2/picamera/camera.py", line 507, in init self.STEREO_MODES[stereo_mode], stereo_decimate) File "/home/pi/ivport-v2/picamera/camera.py", line 664, in _init_camera prefix="Camera component couldn't be enabled") File "/home/pi/ivport-v2/picamera/exc.py", line 191, in mmal_check raise PiCameraMMALError(status, prefix) picamera.exc.PiCameraMMALError: Camera component couldn't be enabled: Out of resources (other than memory)