Ivan Rusanov

It looks like this:  Only changed things are applied, e.g. if you don't change anything in the manual overclock section it gets ignored when Apply is clicked. Not very...

The manual overclock won't work for the 4000 series, because I don't know the commands for it, also don't know if it is possible at all. You can only play...

Usually on these APUs you need to change the DID to something lower than the default, then the CPU goes into OC mode, but this means it would stay at...

Yes, that MSR is used for controlling the PB bit, but last time I tried it didn't work either. It just gets ignored.

That's a good news. It was working on the 1000 series before, then stopped after one of the AGESA updates. Currently, you can't do much on the 1800X with new...

Probably manual OC does not work or it depends on some other option. Have you tried to use the P-States instead? Also trying the old trick of decreasing DID e.g....

Have anyone tried if Ryzen Master work on these mobile CPUs? PS: Apparently not, but you can try this tool: https://github.com/sbski/Renoir-Mobile-Tuning It's basically a GUI wrapper for ryzenadj. I don't...

@yutouyes Yes, the command for forcing manual oc mode fails. It's either unsupported or has a different ID. There also might be no support for voltage change on mobile chips...

Pushed a new release of the debug tool with Renoir support (desktop). It should start on mobile as well, but OC frequency and voltage won't work. I will have to...

I have some Renoir reports from users ``` Desktop 4650G, SMU 55.68.00 Mobile 4700U, SMU 55.69.00 Mobile 4500U, SMU 55.71.0 Desktop 4650G, SMU 55.77.0 ``` The detected versions might be...