ioBroker.zwave icon indicating copy to clipboard operation
ioBroker.zwave copied to clipboard

Published 20 hours ago • verified publisher icon ioBroker

No Temperature on Smokedetector

Open Telefisch opened this issue 5 years ago • 2 comments

I installed the Stick and paired some smokedetectors but didn't get any temperature-property.

The type of sensor istn detected. Only Notification Sensor is shown in the devicelist. The stick is detected as shown below: Z-Wave.Me | ZME_UZB1 USB Stick | Static PC Controller

It is ready (awake) but the dot of the adapter is shown yellow (not conneted with zwave)

Telefisch avatar Jan 20 '20 08:01 Telefisch

If the adapter is yellow you need to check the logs for errors. And in general we need more information (version of the adapter, logs, type of the device and so on)

cburghardt avatar Feb 02 '20 18:02 cburghardt

Ok, the only message from zwave.0 is:

zwave.0 | 2020-02-06 09:44:37.416 | info | (3359) List of ports: [{"comName":"/dev/ttyACM0"},{"comName":"/dev/ttyACM1"}]

State is: connected to host, alive, not connected to zwave Adapter-Version is 1.7.3 Devices are: Z-Wave.Me ZME_UZB1 USB Stick (This Information is shown in the adapterconig) Fibaro Smoke Sensor FGSD-0002 EU (Only "Notification Sensor" is shown in the adapter)

Telefisch avatar Feb 06 '20 08:02 Telefisch