Logs from Sonoff B1 and Sonoff SC (Plz add)

[Mesteriis]

Sonoff B1 logs

19:45:14 MQT: Attempting connection... 19:45:14 MQT: Connected 19:45:14 MQT: SHOME/sonoff/LED1/LWT = Online (retained) 19:45:14 MQT: SHOME/sonoff/LED1/cmnd/POWER = 19:45:14 MQT: SHOME/sonoff/LED1/INFO1 = {"Module":"Sonoff B1","Version":"5.9.1f","FallbackTopic":"LED1","GroupTopic":"sonoffs"} 19:45:14 MQT: SHOME/sonoff/LED1/INFO2 = {"WebServerMode":"Admin","Hostname":"LED1","IPAddress":"192.168.1.110"} 19:45:14 MQT: SHOME/sonoff/LED1/INFO3 = {"RestartReason":"Power on"} 19:45:15 MQT: SHOME/sonoff/LED1/RESULT = {"POWER":"ON"} 19:45:15 MQT: SHOME/sonoff/LED1/POWER = ON 19:45:22 MQT: SHOME/sonoff/LED1/STATE = {"Time":"2018-01-19T19:45:22","Uptime":0,"Vcc":3.289,"POWER":"ON","Wifi":{"AP":1,"SSId":"SmartHOME","RSSI":96,"APMac":"60:31:97:3E:74:B4"}} 19:50:22 MQT: SHOME/sonoff/LED1/STATE = {"Time":"2018-01-19T19:50:22","Uptime":0,"Vcc":3.280,"POWER":"ON","Wifi":{"AP":1,"SSId":"SmartHOME","RSSI":82,"APMac":"60:31:97:3E:74:B4"}} 19:55:07 APP: Serial logging disabled 19:55:22 MQT: SHOME/sonoff/LED1/STATE = {"Time":"2018-01-19T19:55:22","Uptime":0,"Vcc":3.280,"POWER":"ON","Wifi":{"AP":1,"SSId":"SmartHOME","RSSI":86,"APMac":"60:31:97:3E:74:B4"}} 20:00:22 MQT: SHOME/sonoff/LED1/STATE = {"Time":"2018-01-19T20:00:22","Uptime":0,"Vcc":3.279,"POWER":"ON","Wifi":{"AP":1,"SSId":"SmartHOME","RSSI":88,"APMac":"60:31:97:3E:74:B4"}} 20:02:00 MQT: SHOME/sonoff/LED1/UPTIME = {"Time":"2018-01-19T20:02:00","Uptime":1} 20:02:50 CMD: color 12 20:02:50 MQT: SHOME/sonoff/LED1/RESULT = {"POWER":"ON","Dimmer":100,"Color":"FFFFFF0000"} 20:02:58 CMD: Dimmer 20:02:58 MQT: SHOME/sonoff/LED1/RESULT = {"Dimmer":100} 20:07:18 CMD: CT 20:07:18 MQT: SHOME/sonoff/LED1/RESULT = {"CT":499}

Command options Color Command | Payload | Description Color | 1 | Set color to Red Color | 2 | Set color to Green Color | 3 | Set color to Blue Color | 4 | Set color to Orange Color | 5 | Set color to Light Green Color | 6 | Set color to Light Blue Color | 7 | Set color to Amber Color | 8 | Set color to Cyan Color | 9 | Set color to Purple Color | 10 | Set color to Yellow Color | 11 | Set color to Pink Color | 12 | Set color to White

Command options CT

CT |   | (Sonoff B1 and Led) Show current Color Temperature (153 = Cold, 500 = Warm) CT | 153..500 | (Sonoff B1 and Led) Set color temperature from cold to warm CT | + | Increment CT in 10 steps CT | - | Decrement CT in 10 steps

Command options Dimmer

Dimmer |   | Show current dimmer setting from 0 to 100% Dimmer | 0..100 | Set dimmer value from 0 to 100% Dimmer | + | Increment brightness in 10 steps Dimmer | - | Decrement brightness in 10 steps

Command options Scheme Scheme |   | Show current selected scheme Scheme | 0 | (default) Use a single color for all pixels in light/strip/ring Scheme | 1 | (= Wakeup) Start wake up sequence Scheme | 2 | Cycle through RGB colors using speed option Scheme | 3 | Cycle through RBG colors using speed option Scheme | 4 | Random cycle through colors using speed and fade options

Sonoff SC logs

20:15:08 MQT: SHOME/sonoff/HomeMonitor/INFO1 = {"Module":"Sonoff SC","Version":"5.9.1f","FallbackTopic":"HomeMonitor","GroupTopic":"sonoffs"} 20:15:08 MQT: SHOME/sonoff/HomeMonitor/INFO2 = {"WebServerMode":"Admin","Hostname":"HomeMonitor","IPAddress":"192.168.1.112"} 20:15:08 MQT: SHOME/sonoff/HomeMonitor/INFO3 = {"RestartReason":"Power on"} 20:15:16 MQT: SHOME/sonoff/HomeMonitor/STATE = {"Time":"2018-01-19T20:15:16","Uptime":0,"Vcc":3.170,"Wifi":{"AP":1,"SSId":"SmartHOME","RSSI":100,"APMac":"60:31:97:3E:74:B4"}} 20:15:16 MQT: SHOME/sonoff/HomeMonitor/SENSOR = {"Time":"2018-01-19T20:15:16","Temperature":20.0,"Humidity":16.0,"Light":10,"Noise":60,"AirQuality":90,"TempUnit":"C"}

Command options Altitude |   | Show current Altitude to be used by calculating Sea level Pressure Altitude | -30000..30000 | Set local Altitude in meters AmpRes |   | Show current Current Resolution AmpRes | 0..3 | Set Current Resolution Counter |   | Show current Counter 1..4 value Counter | 0 | Reset Counter 1..4 Counter | 1..64900 | Preset Counter 1..4 CounterDebounce |   | Show current global Counter debounce time in mSec CounterDebounce | 0 / off | Turn global Counter debounce off CounterDebounce | 1..3200 | Set global Counter debounce in mSec CounterType |   | Show current Counter 1..4 type as pulse Counter or pulse Timer CounterType | 0 / off | Set current Counter 1..4 type as pulse Counter CounterType | 1 / on | Set current Counter 1..4 type as pulse Timer EnergyRes |   | Show current Energy Resolution EnergyRes | 0..5 | Set Energy Resolution HumRes |   | Show current Humidity Resolution HumRes | 0..3 | Set Humidity Resolution Ina219Mode |   | Show current Ina219 Calibration Mode Ina219Mode | 0 | Set Ina219 Calibration to max 32V and 2A Ina219Mode | 1 | Set Ina219 Calibration to max 32V and 1A Ina219Mode | 2 | Set Ina219 Calibration to max 16V and 0.4A PressRes |   | Show current Pressure Resolution PressRes | 0..3 | Set Pressure Resolution SetOption8 |   | Show current Temperature as either Celsius or Fahrenheit SetOption8 | 0 / celsius | Set Temperature to Celsius SetOption8 | 1 / fahrenheit | Set Temperature to Fahrenheit SetOption18 |   | Show Signal Light state - currently used with CO2 sensors only SetOption18 | 0 / off | (default) Disable signal light SetOption18 | 1 / on | Enable signal light TempRes |   | Show current Temperature Resolution TempRes | 0..3 | Set Temperature Resolution TempUnit |   | Replaced by SetOption8 VoltRes |   | Show current Voltage Resolution VoltRes | 0..3 | Set Voltage Resolution WattRes |   | Show current Power Resolution WattRes | 0..3 | Set Power Resolution

Link to tasmota wiki commands: https://github.com/arendst/Sonoff-Tasmota/wiki/Commands#ws2812-ailight-sonoff-led-b1-bn-sz01-h801-and-magichome

[GermanBluefox]

I am bit busy with cloud. I dont promise, that this will come soon.

[Mesteriis]

Hi, I wanted to clarify enough information to add functionality. Or add something. I can also be a beta test

[ihavenonick]

Das wäre echt der Hammer, wenn man die B1 direkt über den Adapter steuern könnte, freu. Wollte eben gerade die gewünschten Daten posten und siehe da, der Wunsch existiert schon.