odas
odas copied to clipboard
introlab
ReSpeaker_Mic_Array_v2.0 didn't work
Hello Thanks for developing this nice tool. I'm trying to do a project that use a circular microphone array to DOA. And I connect the microphone array with computer and run ODAS_WEB and ODASin Deepin, but it didn't work. My config file like this,it't according to your sample.
# Configuration file for ReSpeaker 4 Mic Array (a hat for Raspberry Pi)
version = "2.1";
# Raw
raw:
{
fS = 16000;
hopSize = 128;
nBits = 32;
nChannels = 4;
# Input with raw signal from microphones
interface: {
type = "soundcard";
card = 1;
device = 0;
}
}
Interface:
When i run odas it's show like this
odas_web show like this
which part of the code in ODAS_CORE and ODAS_WEB should I modify? Thank you
Maybe include your full config. Also why don't you use the odas.cfg from http://wiki.seeedstudio.com/ReSpeaker_Mic_Array_v2.0?
Maybe include your full config. Also why don't you use the odas.cfg from http://wiki.seeedstudio.com/ReSpeaker_Mic_Array_v2.0?
`
Configuration file for XMOS circular sound card
version = "2.1";
Raw
raw: {
fS = 16000;
hopSize = 128;
nBits = 16;
nChannels = 6;
# Input with raw signal from microphones
interface: {
type = "soundcard";
card = 1;
device = 0;
}
}
Mapping
mapping: {
map: (2, 3, 4, 5);
}
General
general: {
epsilon = 1E-20;
size:
{
hopSize = 128;
frameSize = 256;
};
samplerate:
{
mu = 16000;
sigma2 = 0.01;
};
speedofsound:
{
mu = 343.0;
sigma2 = 25.0;
};
mics = (
# Microphone 2
{
mu = ( -0.032, +0.000, +0.000 );
sigma2 = ( +0.000, +0.000, +0.000, +0.000, +0.000, +0.000, +0.000, +0.000, +0.000 );
direction = ( +0.000, +0.000, +1.000 );
angle = ( 80.0, 100.0 );
},
# Microphone 3
{
mu = ( +0.000, -0.032, +0.000 );
sigma2 = ( +0.000, +0.000, +0.000, +0.000, +0.000, +0.000, +0.000, +0.000, +0.000 );
direction = ( +0.000, +0.000, +1.000 );
angle = ( 80.0, 100.0 );
},
# Microphone 4
{
mu = ( +0.032, +0.000, +0.000 );
sigma2 = ( +0.000, +0.000, +0.000, +0.000, +0.000, +0.000, +0.000, +0.000, +0.000 );
direction = ( +0.000, +0.000, +1.000 );
angle = ( 80.0, 100.0 );
},
# Microphone 5
{
mu = ( +0.000, +0.032, +0.000 );
sigma2 = ( +0.000, +0.000, +0.000, +0.000, +0.000, +0.000, +0.000, +0.000, +0.000 );
direction = ( +0.000, +0.000, +1.000 );
angle = ( 80.0, 100.0 );
}
);
# Spatial filter to include only a range of direction if required
# (may be useful to remove false detections from the floor)
spatialfilters = (
{
direction = ( +0.000, +0.000, +1.000 );
angle = (80.0, 100.0);
}
);
nThetas = 181;
gainMin = 0.25;
};
Stationnary noise estimation
sne: {
b = 3;
alphaS = 0.1;
L = 150;
delta = 3.0;
alphaD = 0.1;
}
Sound Source Localization
ssl: {
nPots = 4;
nMatches = 10;
probMin = 0.5;
nRefinedLevels = 1;
interpRate = 4;
# Number of scans: level is the resolution of the sphere
# and delta is the size of the maximum sliding window
# (delta = -1 means the size is automatically computed)
scans = (
{ level = 2; delta = -1; },
{ level = 4; delta = -1; }
);
# Output to export potential sources
potential: {
# format = "undefined";
format = "json";
interface: {
# type = "blackhole";
type = "socket"; ip = "127.0.0.1"; port = 9001;
};
};
};
Sound Source Tracking
sst: {
# Mode is either "kalman" or "particle"
mode = "kalman";
# Add is either "static" or "dynamic"
add = "dynamic";
# Parameters used by both the Kalman and particle filter
active = (
{ weight = 1.0; mu = 0.4; sigma2 = 0.0025 }
);
inactive = (
{ weight = 1.0; mu = 0.25; sigma2 = 0.0025 }
);
sigmaR2_prob = 0.0025;
sigmaR2_active = 0.0225;
sigmaR2_target = 0.0025;
Pfalse = 0.1;
Pnew = 0.1;
Ptrack = 0.8;
theta_new = 0.9;
N_prob = 5;
theta_prob = 0.8;
N_inactive = ( 250, 250, 250, 250 );
theta_inactive = 0.9;
# Parameters used by the Kalman filter only
kalman: {
sigmaQ = 0.001;
};
# Parameters used by the particle filter only
particle: {
nParticles = 1000;
st_alpha = 2.0;
st_beta = 0.04;
st_ratio = 0.5;
ve_alpha = 0.05;
ve_beta = 0.2;
ve_ratio = 0.3;
ac_alpha = 0.5;
ac_beta = 0.2;
ac_ratio = 0.2;
Nmin = 0.7;
};
target: ();
# Output to export tracked sources
tracked: {
format = "json";
interface: {
# type = "file";
# path = "tracks.txt";
type = "socket"; ip = "127.0.0.1"; port = 9000;
};
};
}
sss: {
# Mode is either "dds", "dgss" or "dmvdr"
mode_sep = "dgss";
mode_pf = "ms";
gain_sep = 1.0;
gain_pf = 10.0;
dds: {
};
dgss: {
mu = 0.01;
lambda = 0.5;
};
dmvdr: {
};
ms: {
alphaPmin = 0.07;
eta = 0.5;
alphaZ = 0.8;
thetaWin = 0.3;
alphaWin = 0.3;
maxAbsenceProb = 0.9;
Gmin = 0.01;
winSizeLocal = 3;
winSizeGlobal = 23;
winSizeFrame = 256;
};
ss: {
Gmin = 0.01;
Gmid = 0.9;
Gslope = 10.0;
};
separated: {
fS = 16000;
hopSize = 128;
nBits = 16;
interface: {
type = "file";
path = "separated.raw";
};
};
postfiltered: {
fS = 16000;
hopSize = 128;
nBits = 16;
gain = 10.0;
interface: {
type = "file";
path = "postfiltered.raw";
};
};
};
classify: {
frameSize = 4096;
winSize = 3;
tauMin = 88;
tauMax = 551;
deltaTauMax = 20;
alpha = 0.3;
gamma = 0.05;
phiMin = 0.5;
r0 = 0.2;
category: {
format = "undefined";
interface: {
type = "blackhole";
}
}
} `
I use the odas.cfg,but still got
Sink pots: Cannot connect to server Sink tracks: Cannot connect to server
I use the odas.cfg,but still got
Sink pots: Cannot connect to server Sink tracks: Cannot connect to server
I'm in the same situation, but it worked fine on odas_web. I think the options for the odaslive command have changed, but I'm not sure.
