ingbrzy comments

Results 26 comments of


                                            ingbrzy

PrusaLink 0.8.1 with USB OTG Wi-Fi Dongle

@3d-gussner any response from devs?

PrusaLink 0.8.1 with USB OTG Wi-Fi Dongle

@3d-gussner I hope devs had a great holidays.. any response from them?

PrusaLink 0.8.1 with USB OTG Wi-Fi Dongle

I am using dongle TP-LINK TL-WN722N and there is no issue to get it work on Rpi OS.. it runs correctly but doesn't work for PrusaLink only due to IP...

[Multi material] Support interfece material is used in the main support structure, causes tree support breakages

one more point, when all heads are parked, nozzle position overlaps with text on Prusa Connect.. ![image](https://github.com/prusa3d/Prusa-Link/assets/1762519/2e67a48d-a131-4752-a266-db89eeae8239)

[Multi material] Support interfece material is used in the main support structure, causes tree support breakages

solved by 6.0.0 RC3 Firmware

[Multi material] Support interfece material is used in the main support structure, causes tree support breakages

sorry, not fixed.. just tested again..

[Multi material] Support interfece material is used in the main support structure, causes tree support breakages

where to report XL Prusa Connect issues?

Prusalink 0.8.1 update on Raspberry pi 2w zero

Hello.. You have to update MK3S+ Firmware to 3.14 to be able boot Prusalink 0.8.1 https://github.com/prusa3d/Prusa-Firmware/releases/tag/v3.14.0

Prusalink 0.8.1 update on Raspberry pi 2w zero

are you able to connect to the IP which is shown on your printer screen? you have to complete setup wizard there..

Prusalink 0.8.1 update on Raspberry pi 2w zero

try format SD card again and install fresh Prusalink 0.8.1 image..