zha-device-handlers [Device Support Request] Skydance WZ-SPI RGBW LED Strip Controller

Problem description

The device connects to Home Assistant correctly. Firmware and diagnostic information is shown. It is, however, not possible to control the color/brightness/pattern of the LED strip.

Product Page: https://iskydance.com/index.php?c=product_show&a=index&id=2439

Solution description

Control LED strips in the same way as other LED strip controllers already supported by ZHA.

Screenshots/Video

No response

Device signature

{
  "node_descriptor": {
    "logical_type": 1,
    "complex_descriptor_available": 0,
    "user_descriptor_available": 0,
    "reserved": 0,
    "aps_flags": 0,
    "frequency_band": 8,
    "mac_capability_flags": 142,
    "manufacturer_code": 4417,
    "maximum_buffer_size": 66,
    "maximum_incoming_transfer_size": 66,
    "server_mask": 10752,
    "maximum_outgoing_transfer_size": 66,
    "descriptor_capability_field": 0
  },
  "endpoints": {
    "1": {
      "profile_id": "0x0104",
      "device_type": "0x0051",
      "input_clusters": [
        "0x0000",
        "0x0004",
        "0x0005",
        "0xef00"
      ],
      "output_clusters": [
        "0x000a",
        "0x0019"
      ]
    },
    "242": {
      "profile_id": "0xa1e0",
      "device_type": "0x0061",
      "input_clusters": [],
      "output_clusters": [
        "0x0021"
      ]
    }
  },
  "manufacturer": "_TZE204_8fffc3kb",
  "model": "TS0601",
  "class": "zigpy.device.Device"
}