hal_nxp

hal_nxp copied to clipboard

mcux: remove LA_OPT license files and MCUX SDK SCR

1

Remove LA_OPT license files from the MCUX SDK, as the MCUX SDK imported into the Zephyr MCUX HAL should not include LA_OPT licensed components. Also, remove the software content register...

danieldegrasse

Add connectivity framework middleware + needed patches

2

Adding connectivity framework middleware. Adding needed patches to be used with Zephyr. Update Readme.

yeaissa

Add build support for LPCMP driver

ZhaoxiangJin

Added support for S32K142 SoC

1

This PR addreses the S32K142 SoC. My motivation was that I need to develop a project with a custom board and I thought why not use Zephyr instead. The changes...

vChavezB

drivers: csi: Rework to fix the low framerate issue

2

Currently, the camera framerate is divided by two. This is because the driver only puts the full buffer to the queue and calls the callback at half of the interrupt...

ngphibang

Enable NXP USB Device controllers (udc_mcux) in Zephyr

2

Add the NXP USB Device controllers support in Zephyr. Support EHCI and IP3511, verified on RT1060, LPC55S69 and RT685.

MarkWangChinese

Add flash config for frdmrw612 board.

decsny

drivers: elcdif: Fix register writting issue in SetPixelFormat

1

Currently, when setting pixel format, all the previous values of the CTRL1 register, even not related to pixel format, are unwantedly cleared. This leads to some erroneous behaviors, for example,...

trunghieulenxp

blobs: Add support to pull in binary blobs

1

Pull in the firmware image needed for NXP IW612 WiFi + Bluetooth module This is needed for Zephyr PR https://github.com/zephyrproject-rtos/zephyr/pull/70815

mmahadevan108

Adding header pinctrl files for MKE15x family

EmilioCBen