Andrii Miroshnychenko

should work in EKS just with: ``` output { opensearch { hosts => [ "https://search-kibana-stage-xxx.us-east-1.es.amazonaws.com:443" ] http_compression => true index => "clb-logs-test-%{+YYYY.MM.dd}" ecs_compatibility => disabled auth_type => { type =>...

@Rwwn I run Logstash in the pod inside K8S cluster (EC2 based nodes). The cluster had been created using AWS CDK. How I can see, the instance has ``` IMDSv2...

Is there any solution to run the plugin in K8S/EKS with IAM attached to the service role?

@nguyenthanhhong-tg it shows nothing at 6.x and 7.x. Just tested with my router today.

I did not change any speed setting at the ODI stick and have Auto Negotiation with Mikrotik. Works fine so far.  

Had you any chance to dump the configuration?

@Antonov225 @d5aqoep - I have HL-4GMV4 device here and seems like it's more modified than @Antonov225 has in his post.

Found a similar thread here: https://trzepak.pl/viewtopic.php?t=69695

I was able to connect using serial interface and here are the dumps: - Boot without PON connected: https://pastebin.com/uGmTne45 - Boot with PON connected: https://pastebin.com/bMmcDX6c - Boot into the bootloader:...

 There is a chip like this at the board, so in the theory it can contain the firmware.