Timur Iskhodzhanov

And again thanks a lot for your help figuring out how to add this support!

Ah sorry I've meant 7899d636d83533257843dbb6307e143217a8a7ac

Thanks for the positive feedback, and for reporting this bug! I agree that the bit math for SIDH is wrong: ``` boolean MCP2515Class::setFilterRegisters( uint16_t mask0, uint16_t filter0, uint16_t filter1, uint16_t...

> I wonder how this ever worked in my project, given that half of the CAN IDs my project is listening to are >255.... Oh, I guess it's the classic...

Are you asking about which _pins of the harness_ are 12V and GND?

If I remember correctly, if you look at the connector like on this photo, * the top-left/orange will be Battery 12V (not switched) * the bottom-left/red-black will be ACC 12V...

I don't remember, I was dealing with some performance/stability issues early in the development of this project. It eventually turned out to be a hardware issue (unstable voltage on the...

Hi @thalesmaoa, thanks for reporting the issue in a way that should make it easy for me to reproduce. I personally haven't done much with ESP32 yet, but was thinking...

Do you get any data at all? Try this program instead: https://github.com/timurrrr/arduino-CAN/tree/master/examples/CanBusMonitor and watch Serial Monitor in Arduino IDE. If you got multiple MCP breakout boards, try another one. Did...

I haven't personally tried on a 2022 BRZ but I'm 99% sure that it works. 2022 BRZ and 2022 GR86 are basically the same car.