stm32f4xx-hal

stm32f4xx-hal copied to clipboard

Touchscreen driver

2

Added example to use the ft6x06 touchpanel controller. This example works on STM32F412-G and STM32F413-H discovery boards. It configures the i2c bus and uses ft6x06 crate to get touch coordinates...

Srg213

Passing delay to device driver

1

Hi, Is there a proper way implemented to use blocking delay inside of a device driver? There doesn't seem to be a way to create a driver struct that has...

xiugaze

split USART and UART

2

burrbull

@apollolabsdev asked on Discord what was going on in the adc_dma_rtic example, and I explained it as best I could. They seem to understand it enough to write a blog...

9names

TIM DMA transfer example required for better understanding

1

I realize that this was also discussed in #227 but the issue still seems to persist even so the ticket was closed. I was also curious how this particular person...

Slamy

SPI BIDI mode not working

2

The SPI BIDI mode does not seem to function, it never reads anything other than 255 or 0. I'm using a STEVAL-FCU001 board with a STM32F401 and trying to interface...

daft-panda

burrbull

optimized SPI blocking write

1

requre testing

burrbull

burrbull

Hi, I'm writing a driver using embedded-hal 1.0.0 for I2C communication. I can successfully communicate with the sensor, and the code compiles and works correctly. However, when I detach the...

tamba91