====================================================================================================================== Kayobe Configuration for "A Universe from Nothing: Containerised OpenStack deployment using Kolla, Ansible and Kayobe"

This repository may be used as a workshop to configure, deploy and get hands-on with OpenStack Kayobe.

It provides a configuration and walkthrough for the Kayobe <https://docs.openstack.org/kayobe/latest/>__ project based on the configuration provided by the kayobe-config <https://opendev.org/openstack/kayobe-config>__ repository. It deploys a containerised OpenStack environment using Kolla, Ansible and Kayobe.

Select the Git branch of this repository for the OpenStack release you are interested in, and follow the README.

Requirements

For this workshop we require the use of a single server, configured as a seed hypervisor. This server should be a bare metal node or VM running CentOS 8, with the following minimum requirements:

• 32GB RAM
• 80GB disk

We will also need SSH access to the seed hypervisor, and passwordless sudo configured for the login user.

Exercise

On the seed hypervisor we will deploy three VMs:

• 1 seed
• 1 controller
• 1 compute node

The seed runs a standalone Ironic service. The controller and compute node are 'virtual bare metal' hosts, and we will use the seed to provision them with an OS. Next we'll deploy OpenStack services on the controller and compute node.

At the end you'll have a miniature OpenStack cluster that you can use to test out booting an instance using Nova, access the Horizon dashboard, etc.

Usage

There are four parts to this guide:

• Preparation_
• Deploying a Seed_
• A Universe from a Seed_
• Next Steps_

Preparation has instructions to prepare the seed hypervisor for the exercise, and fetching the necessary source code.

Deploying a Seed includes all instructions necessary to download and install the Kayobe prerequisites on a plain CentOS 8 cloud image, including provisioning and configuration of a seed VM. Optionally, snapshot the instance after this step to reduce setup time in future.

A Universe from a Seed contains all instructions necessary to deploy from a host running a seed VM. An image suitable for this can be created via Optional: Creating a Seed Snapshot_.

Once the control plane has been deployed see Next Steps_ for some ideas for what to try next.

Preparation

This shows how to prepare the seed hypervisor for the exercise. It assumes you have created a seed hypervisor instance fitting the requirements above and have already logged in (e.g. ssh centos@<ip>).

.. code-block:: console

Install git and tmux.

if $(which dnf 2>/dev/null >/dev/null); then sudo dnf -y install git tmux else sudo apt update sudo apt -y install git tmux fi

Disable the firewall.

sudo systemctl is-enabled firewalld && sudo systemctl stop firewalld && sudo systemctl disable firewalld

Disable SELinux both immediately and permanently.

if $(which setenforce 2>/dev/null >/dev/null); then sudo setenforce 0 sudo sed -i 's/^SELINUX=enforcing/SELINUX=disabled/' /etc/selinux/config fi

Prevent sudo from making DNS queries.

echo 'Defaults !fqdn' | sudo tee /etc/sudoers.d/no-fqdn

Optional: start a new tmux session in case we lose our connection.

tmux

Start at home.

cd

Clone Kayobe.

git clone https://opendev.org/openstack/kayobe.git -b stable/yoga cd kayobe

Clone the Tenks repository.

git clone https://opendev.org/openstack/tenks.git

Clone this Kayobe configuration.

mkdir -p config/src cd config/src/ git clone https://github.com/stackhpc/a-universe-from-nothing.git kayobe-config -b stable/yoga

Configure host networking (bridge, routes & firewall)

./kayobe-config/configure-local-networking.sh

Install kayobe.

cd ~/kayobe ./dev/install-dev.sh

Deploying a Seed

This shows how to create an image suitable for deploying Kayobe. It assumes you have created a seed hypervisor instance fitting the requirements above and have already logged in (e.g. ssh centos@<ip>), and performed the necessary Preparation_.

.. code-block:: console

cd ~/kayobe

Activate the Kayobe environment, to allow running commands directly.

source ~/kayobe-venv/bin/activate source config/src/kayobe-config/kayobe-env

Bootstrap the Ansible control host.

kayobe control host bootstrap

Configure the seed hypervisor host.

kayobe seed hypervisor host configure

Provision the seed VM.

kayobe seed vm provision

Configure the seed host, and deploy a local registry.

kayobe seed host configure

Pull, retag images, then push to our local registry.

./config/src/kayobe-config/pull-retag-push-images.sh

Deploy the seed services.

kayobe seed service deploy

Deploying the seed restarts networking interface,

run configure-local-networking.sh again to re-add routes.

./config/src/kayobe-config/configure-local-networking.sh

Optional: Shutdown the seed VM if creating a seed snapshot.

sudo virsh shutdown seed

If required, add any additional SSH public keys to /home/centos/.ssh/authorized_keys

Optional: Creating a Seed Snapshot ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

If necessary, take a snapshot of the hypervisor instance at this point to speed up this process in future.

You are now ready to deploy a control plane using this host or snapshot.

A Universe from a Seed

This shows how to deploy a control plane from a VM image that contains a pre-deployed seed VM, or a host that has run through the steps in Deploying a Seed.

Having a snapshot image saves us some time if we need to repeat the deployment. If working from a snapshot, create a new instance with the same dimensions as the Seed image and log in to it. Otherwise, continue working with the instance from Deploying a Seed_.

.. code-block:: console

Optional: start a new tmux session in case we lose our connection.

tmux

Set working directory

cd ~/kayobe

Configure non-persistent networking, if the node has rebooted.

./config/src/kayobe-config/configure-local-networking.sh

Make sure that the seed VM (running Bifrost and supporting services) is present and running.

.. code-block:: console

Check if the seed VM is present and running.

sudo virsh list --all

Start up the seed VM if it is shut off.

sudo virsh start seed

We use the TENKS project <https://www.stackhpc.com/tenks.html>_ to model some 'bare metal' VMs for the controller and compute node. Here we set up our model development environment, alongside the seed VM.

.. code-block:: console

NOTE: Make sure to use ./tenks, since just ‘tenks’ will install via PyPI.

export TENKS_CONFIG_PATH=config/src/kayobe-config/tenks.yml ./dev/tenks-deploy-overcloud.sh ./tenks

Activate the Kayobe environment, to allow running commands directly.

source dev/environment-setup.sh

Inspect and provision the overcloud hardware:

kayobe overcloud inventory discover kayobe overcloud hardware inspect kayobe overcloud introspection data save kayobe overcloud provision

Configure and deploy OpenStack to the control plane (following Kayobe host configuration documentation <https://docs.openstack.org/kayobe/latest/deployment.html#id3>_):

.. code-block:: console

kayobe overcloud host configure kayobe overcloud container image pull kayobe overcloud service deploy source config/src/kayobe-config/etc/kolla/public-openrc.sh kayobe overcloud post configure

At this point it should be possible to access the Horizon GUI via the server's public IP address, using port 80 (achieved through port forwarding to the controller VM). Use the admin credentials from OS_USERNAME and OS_PASSWORD to get in.

The following script will register some resources (keys, flavors, networks, images, etc) in OpenStack to enable booting up a tenant VM:

.. code-block:: console

source config/src/kayobe-config/etc/kolla/public-openrc.sh ./config/src/kayobe-config/init-runonce.sh

Following the instructions displayed by the above script, boot a VM. You'll need to have activated the ~/os-venv virtual environment.

.. code-block:: console

source ~/os-venv/bin/activate openstack server create --image cirros
--flavor m1.tiny
--key-name mykey
--network demo-net demo1

Assign a floating IP to the server to make it accessible.

openstack floating ip create public1 fip=$(openstack floating ip list -f value -c 'Floating IP Address' --status DOWN | head -n 1) openstack server add floating ip demo1 $fip

Check SSH access to the VM.

ssh cirros@$fip

If the ssh command above fails you may need to reconfigure the local

networking setup again: ~/kayobe/config/src/kayobe-config/configure-local-networking.sh

Note: when accessing the VNC console of an instance via Horizon, you will be sent to the internal IP address of the controller, 192.168.33.2, which will fail. Open the console-only display link in new broser tab and replace this IP in the address bar with the public IP of the hypervisor host.

That's it, you're done!

Next Steps

Here's some ideas for things to explore with the deployment:

• Access Control Plane Components: take a deep dive into the internals by Exploring the Deployment_.
• Deploy Elasticsearch and Kibana: see Enabling Centralised Logging_ to get logs aggregated from across our OpenStack control plane.

Exploring the Deployment ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Once each of the VMs becomes available, they should be accessible via SSH as the centos or stack user at the following IP addresses:

=========== ================ Host IP =========== ================ seed 192.168.33.5 controller0 192.168.33.3 compute0 192.168.33.6 =========== ================

The control plane services are run in Docker containers, so try using the docker CLI to inspect the system.

.. code-block:: console

# List containers
docker ps
# List images
docker images
# List volumes
docker volume ls
# Inspect a container
docker inspect <container name>
# Execute a process in a container
docker exec -it <container> <command>

The kolla container configuration is generated under /etc/kolla on the seed and overcloud hosts - each container has its own directory that is bind mounted into the container.

Log files are stored in the kolla_logs docker volume, which is mounted at /var/log/kolla in each container. They can be accessed on the host at /var/lib/docker/volumes/kolla_logs/_data/.

Exploring Tenks & the Seed ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Verify that Tenks has created controller0 and compute0 VMs:

.. code-block:: console

sudo virsh list --all

Verify that virtualbmc <https://opendev.org/openstack/virtualbmc>_ is running:

.. code-block:: console

/usr/local/bin/vbmc list
+-------------+---------+--------------+------+
| Domain name | Status  | Address      | Port |
+-------------+---------+--------------+------+
| compute0    | running | 192.168.33.4 | 6231 |
| controller0 | running | 192.168.33.4 | 6230 |
+-------------+---------+--------------+------+

VirtualBMC config is here (on the VM hypervisor host):

.. code-block:: console

/root/.vbmc/controller0/config

Note that the controller and compute node are registered in Ironic, in the bifrost container. Once kayobe is deployed and configured the compute0 and controller0 will be controlled by bifrost and not virsh commands.

.. code-block:: console

ssh [email protected]
docker exec -it bifrost_deploy bash
export OS_CLOUD=bifrost
baremetal node list
+--------------------------------------+-------------+---------------+-------------+--------------------+-------------+
| UUID                                 | Name        | Instance UUID | Power State | Provisioning State | Maintenance |
+--------------------------------------+-------------+---------------+-------------+--------------------+-------------+
| d7184461-ac4b-4b9e-b9ed-329978fc0648 | compute0    | None          | power on    | active             | False       |
| 1a40de56-be8a-49e2-a903-b408f432ef23 | controller0 | None          | power on    | active             | False       |
+--------------------------------------+-------------+---------------+-------------+--------------------+-------------+
exit

Enabling Centralised Logging ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

In Kolla-Ansible, centralised logging is easily enabled and results in the deployment of Elasticsearch and Kibana services and configuration to forward all OpenStack service logging. Be cautious as Elasticsearch will consume a significant portion of available resources on a standard deployment.

To enable the service, one flag must be changed in ~/kayobe/config/src/kayobe-config/etc/kayobe/kolla.yml:

.. code-block:: diff

-#kolla_enable_central_logging:
+kolla_enable_central_logging: yes

This will install elasticsearch and kibana containers, and configure logging via fluentd so that logging from all deployed Docker containers will be routed to Elasticsearch.

Before this can be applied, it is necessary to download the missing images to the seed VM. Pull, retag and push the centralised logging images:

.. code-block:: console

~/kayobe/config/src/kayobe-config/pull-retag-push-images.sh kibana elasticsearch

To deploy the logging stack:

.. code-block:: console

kayobe overcloud container image pull
kayobe overcloud service deploy

As simple as that...

The new containers can be seen running on the controller node:

.. code-block:: console

$ ssh [email protected] sudo docker ps
CONTAINER ID        IMAGE                                                                   COMMAND                  CREATED             STATUS              PORTS               NAMES
304b197f888b        192.168.33.5:4000/kolla/centos-source-kibana:yoga                     "dumb-init --single-c"   18 minutes ago      Up 18 minutes                           kibana
9eb0cf47c7f7        192.168.33.5:4000/kolla/centos-source-elasticsearch:yoga              "dumb-init --single-c"   18 minutes ago      Up 18 minutes                           elasticsearch
...

We can see the log indexes in Elasticsearch:

.. code-block:: console

curl -X GET "192.168.33.3:9200/_cat/indices?v"

To access Kibana, we must first forward connections from our public interface to the kibana service running on our controller0 VM.

The easiest way to do this is to add Kibana's default port (5601) to our configure-local-networking.sh script in ~/kayobe/config/src/kayobe-config/:

.. code-block:: diff

--- a/configure-local-networking.sh
+++ b/configure-local-networking.sh
@@ -20,7 +20,7 @@ seed_hv_private_ip=$(ip a show dev $iface | grep 'inet ' | awk '{ print $2 }' |
 # Forward the following ports to the controller.
 # 80: Horizon
 # 6080: VNC console
-forwarded_ports="80 6080"
+forwarded_ports="80 6080 5601"

Then rerun the script to apply the change:

.. code-block:: console

config/src/kayobe-config/configure-local-networking.sh

We can now connect to Kibana using our hypervisor host public IP and port 5601.

The username is kibana and the password we can extract from the Kolla-Ansible passwords (in production these would be vault-encrypted but they are not here).

.. code-block:: console

grep kibana config/src/kayobe-config/etc/kolla/passwords.yml

Once you're in, Kibana needs some further setup which is not automated. Set the log index to flog-* and you should be ready to go.

Adding the Barbican service ^^^^^^^^^^^^^^^^^^^^^^^^^^^

Barbican <https://docs.openstack.org/barbican/latest/>_ is the OpenStack secret management service. It is an example of a simple service we can use to illustrate the process of adding new services to our deployment.

As with the Logging service above, enable Barbican by modifying the flag in ~/kayobe/config/src/kayobe-config/etc/kayobe/kolla.yml as follows:

.. code-block:: diff

-#kolla_enable_barbican:
+kolla_enable_barbican: yes

This instructs Kolla to install the barbican api, worker & keystone-listener containers. Pull down barbican images:

.. code-block:: console

~/kayobe/config/src/kayobe-config/pull-retag-push-images.sh barbican

To deploy the Barbican service:

.. code-block:: console

# Activate the venv if not already active
cd ~/kayobe
source dev/environment-setup.sh

kayobe overcloud container image pull
kayobe overcloud service deploy

Once Barbican has been deployed it can be tested using the barbicanclient plugin to the OpenStack CLI. This should be installed and tested in the OpenStack venv:

.. code-block:: console

# Deactivate existing venv context if necessary
deactivate

# Activate the OpenStack venv
. ~/os-venv/bin/activate

# Install barbicanclient
pip install python-barbicanclient -c https://releases.openstack.org/constraints/upper/yoga

# Source the OpenStack environment variables
source ~/kayobe/config/src/kayobe-config/etc/kolla/public-openrc.sh

# Store a test secret
openstack secret store --name mysecret --payload foo=bar

# Copy the 'Secret href' URI for later use
SECRET_URL=$(openstack secret list --name mysecret -f value --column 'Secret href')

# Get secret metadata
openstack secret get ${SECRET_URL}

# Get secret payload
openstack secret get ${SECRET_URL} --payload

Congratulations, you have successfully installed Barbican on Kayobe.

References

• Kayobe documentation: https://docs.openstack.org/kayobe/latest/
• Source: https://github.com/stackhpc/a-universe-from-nothing
• Bugs: https://github.com/stackhpc/a-universe-from-nothing/issues
• IRC: #openstack-kolla