nrfprog.sh

This is a loose shell port of the nrfjprog.exe program distributed by Nordic. It relies on JLinkExe (from https://www.segger.com/jlink-software.html) to interface with the JLink hardware.

The generated scripts were basically lifted from the Makefiles distributed with the nrf51-pure-gcc-setup project, so much thanks to @hlnd.

usage:

nrfjprog.sh <action> [hexfile]

where action is one of:

• --reset
• --pin-reset
• --erase-all
• --flash
• --flash-softdevice