Rene

Hi Drizz, Strange, did you do a pull the repo? The automatic CI build is working fine and just retested it with a fresh clone. But yes, some code has...

So it is the line: 17:11:43.764 > [ 46818][E][WiFiUdp.cpp:183] endPacket(): could not send data: 12 12 should be ENOMEM but there is enough heap space available so strange. However, mention...

Hi Drizz, I just merged 10 minutes ago so you can use the develop branch. So, yes, that would be sufficient. I'm now updating some names in the config and...

What client are you using to receive the stream? VLC?

Strange, over here it works fine with VLC on the same WiFi network. I see in the logging that your device has [PSRAM](https://thingpulse.com/esp32-how-to-use-psram/) (There is some variation in the ESP32CAM...

I removed the code to check for OTA updates. This is in the develop branch. This might help to increase the performance of the camera (packets sent) Can you notice...

Hi Andrian, The camera cannot be initialized; it looks like something hardware related. Is the power supply OK? Otherwise a faulty camera or flat cable connection? It this every time...

I looked at the build and saw this line: Flash: [===== ] 54.4% (used 1069225 bytes from 1966080 bytes) So maybe too big to swap?

Added a setting to enable using the PSRAM module. If there are problems, try without the PSRAM. See PR: https://github.com/rzeldent/esp32cam-rtsp/pull/53 I read that there are modules around with no/faulty PSRAM....

Hi sochartgit, Is it possible to make some logging? Just do the setup and save the serial output... This might possibly clarify some things. Anyone else having these issues?