EasyModbusTCP.NET

EasyModbusTCP.NET copied to clipboard

I never get an exception when using an UnitIdentifier that does not exists... In short.. IP = OK.... PORT = OK... For x = 1 To CInt(Trim(args(3))) Try Dim modbusClient...

KeepITSimpleSolutions

Read weird result from InputRegisters when open multiple modbus client

2

Hi, I encounter a weird problem when multiple modbus client running on the same computer. The first client read wrong number from server when the second client launched. For example,...

HanochZhu

Encountering errors while running a system using Modbus RTU, particularly when employing "write single register" and "read input register" functionalities, signifies a critical challenge. The system failure resulting from a...

ilhamfadhil66

I am using Easymodus in an older Version, which isn't accepted any more in Dor 8.0 . so i tied to install the Nuget package which should work normally. But...

nbkgit

EasyModbusClientExample: Add Slave ID field in TCP mode, plus displaying values in multiple formats

1

* Show and use Slave ID field in ModbusTCP mode * Replaced lsbAnswerFromServer list box with a text box to make it easy to cut and paste into excel. Also,...

natevoci

This PR moved the project to support only current .NET versions, including .Net Framework 4.8 and .Net 6, 7 and 8. It also reduces the warnings in the codebase. A...

MarkDGithub

Based on the server sample, it seems that the intention is for a server application to define the maximum number of holding registers (65535). When a client writes holding registers,...

Mjacq79

I am reading Registers from my GoodWe inverters GW6000ES20 and GW10KN-ET. The documentation says Offset: 35003 Description: Inverter SN Mode: RO Type: STR Length: 8 Remark: ASCII code,16 bytes. Read...

wowogiengen

web site unavailable

1

Wanted to review examples and how to use and the site is broken http://www.easymodbustcp.net/

AGenius