pawol

more log zigbee2mqtt/bridge/logging {"level":"debug","message":"Received Zigbee message from 'termostat_w_salonie', type 'commandMcuSyncTime', cluster 'manuSpecificTuya', data '{\"payloadSize\":213}' from endpoint 1 with groupID 0"} zigbee2mqtt/bridge/logging {"level":"debug","message":"No converter available for 'TS0601_thermostat_1' with cluster 'manuSpecificTuya' and...

Probably I reported similar issue there: https://github.com/Koenkk/zigbee2mqtt/issues/20598

I think 1.35 should be rolled back. TRV GTZ06 also has many of features not working after update (especially presets)

@Jason2866 Tasmota 12.2.0.6 was former development version with roller shutter fix. At the moment development version is overwritten by 12.3.0.1. So, I had to revert onto stable 11.1 where roller...

In my case relays does not click at all when should after slider, buttons, etc. The same on 12.3.0.1

BTW. Hard to say that "release" is stable version. From my POV 12.2.0 and 12.3.0 are unusable,

standard logs were delivered. I think there is no traces of buttons inside logs. How to collect logs you need? 12.2.0.6 works ok. We talk about 12.3.0 and 12.3.1

So finally, what commands I have to set on my switch?

I shall try it late evening

Tested on 12.3.1 before commands: 21:28:37.784 CMD: SHUTTERRELAY 21:28:37.786 SRC: WebConsole from 192.168.2.8 21:28:37.789 CMD: Grp 0, Cmd 'SHUTTERRELAY', Idx 1, Len 0, Pld -99, Data '' 21:28:37.795 MQT: stat/roleta_w_pokoju_lewa/RESULT...