zenpower
zenpower copied to clipboard
ocerman
Zenpower is Linux kernel driver for reading temperature, voltage(SVI2), current(SVI2) and power(SVI2) for AMD Zen family CPUs.
Hello everyone, It would be very helpful for me for further development of Zenpower if you can share debug data from zenpower. Zenpower debug data contains raw data from SMN....
[Badge Suggestions]: https://img.shields.io/badge/Ｒｅｐｏｓｉｔｏｒｙ_Ｓｕｇｇｅｓｔｉｏｎｓ-4b781e?style=for-the-badge&logoColor=white&logo=GitHub&labelColor=609926 [Badge Changes]: https://img.shields.io/badge/Ｃｈａｎｇｅｓ-9e122a?style=for-the-badge&logoColor=white&logo=GitLFS&labelColor=D81939 [Badge GitHub]: https://img.shields.io/badge/ＧｉｔＨｕｂ_Ｎｅｗｃｏｍｅｒｓ-be2e47?style=for-the-badge&logoColor=white&logo=BitWarden&labelColor=FD3A5C [Badge Robot]: https://img.shields.io/badge/Ｉ＇ｍ_Ｈｕｍａｎ-8c3b63?style=for-the-badge&logoColor=white&logo=RuboCop&labelColor=c84f8c [Badge Ask]: https://img.shields.io/badge/Ｐｌｅａｓｅ_Ａｓｋ_Ｍｅ-4e2760?style=for-the-badge&logoColor=white&logo=AskUbuntu&labelColor=73398D [Badge Info]: https://img.shields.io/badge/Ｉｎｆｏｒｍａｔｉｏｎ-01434e?style=for-the-badge&logoColor=white&logo=InternetArchive&labelColor=006272 [Button MarkedDown]: https://img.shields.io/badge/MarkedDown-00b2ff?style=for-the-badge&logoColor=white&logo=Markdown [License Badges]: https://github.com/MarkedDown/Licenses [Widgets]: https://github.com/MarkedDown/Disable/blob/main/Features/Widgets.md [Tabs]: https://github.com/MarkedDown/Disable/blob/main/Features/Tabs.md [Wiki]: https://github.com/MarkedDown/Wiki...
Running 5.14 Kernel on B550M and fedora. Module loads but sensors does not find k10temp interfaces to report.
Hi, This is a bit off-topic. I've just installed zenpower and I get it working showing temperatures: ``` amdgpu-pci-0700 Adapter: PCI adapter vddgfx: 1.02 V vddnb: 774.00 mV edge: +52.0°C...
Would it be a lot of work to add support for the Zen3 family? I love zenpower on my 2700x, would be cool if my 5600x would also be supported....
it disables nbfc's fan control, which is the only way to control the fans on the ASUS ROG GL702ZC on Linux.
These two registers have fields which specify the telemetry mode - it can be in voltage-only mode, voltage and current mode, or disabled.
original problem: ocerman/zenmonitor#27 - [ ] Die Temperatures - [ ] CCD Temperatures - [ ] Voltages - [ ] Current
Does Zenpower support the PCI ids for Rome Epyc Zen 2 cpus?
Hi, Ran into this issue before a few kernels back but it did get fixed. All the cores are not displaying the frequency. The rest of the info is there...
