Niels Faber

@JoeHogan thank you for your efforts in investigating this issue. From your results it seems it should be easy to reproduce and tackle. I will look into it when I...

This is issue is resolved with the new v1.10.1 release. I'm sorry for the long delay.

This is finally fixed now.

You should update the card to v2.3.8 (and clear the cache if HACS doesn't do it for you) to see the change.

I decided to proceed by making a 4 layer PCB layout myself. Summary of my changes: * Added 2 inner layers, inner 1 is almost completely empty (only few traces)...

@rbaron > I am happy link your variant in the wiki, but I would suggest we keep your fork separate for now. Otherwise it gets tricky for us to maintain...

> That's cool! Can I ask you what kind of coating do you use? I only have real experience with acrylic-based ones, but I think there's better stuff out there....

@Steiniken I have received the PCBs (all looks fine) and the parts to solder manually, as well as the programmer and probe clamp. The next steps: 1) Complete the soldering...

@Steiniken I put the project on hold since I couldn't get the debugging / programming working. As I don't have a JLink debugger I was using the [BluePill method](https://github.com/rbaron/b-parasite/issues/43#issuecomment-1336617818) instead....

I fully agree with you this information should be displayed here. I can also think of other scenarios, like the alarm failing to arm due to some open sensor. The...